Description
The Action Products Adaptive Flat Pad is a flat sheet of Akton polymer that can be used whole on a seat or cut to size for spot protection almost anywhere skin meets a hard surface. Three configurations are offered here, in 5/8 inch and 1/2 inch thicknesses, for traditional and non-traditional seating challenges alike.
- Cut-to-Fit Sheet – trim the pad to cover arm pads, foot plates, head and leg rests, splints, and braces exactly where protection is needed.
- Full-Size Topper – used whole, it sits on top of a custom cushion base and adds pressure and shear management to the seat.
- Pure Akton Polymer – no foam and no cover, just the ultra-soft polymer that immerses and protects.
- Two Thicknesses – choose 5/8 inch for maximum protection or 1/2 inch where a slimmer layer fits better.
One Polymer Sheet, Dozens of Protection Jobs
Some pressure problems do not happen on the seat at all. They happen where a heel rests on a foot plate, where a forearm sits on an arm pad, or where a splint edge presses into skin. The Adaptive Flat Pad exists for those spots. It is a plain, flat sheet of Akton polymer that therapists and caregivers cut to the shape of the problem, then place between the skin and the surface causing it.
Used uncut, the same sheet becomes a topper for custom wheelchair cushion bases, lending the base the polymer's immersion and shear management without replacing the positioning the base provides. The pad is sold without a cover, which keeps it easy to trim and easy to clean. A Basic Cover is available separately for the 1/2 inch and 5/8 inch thicknesses when a covered finish is preferred.
The three configurations in this listing cover the most requested sizes, an 18 x 16 inch and an 18 x 18 inch in 5/8 inch, and a 16 x 18 inch in 1/2 inch. Measure the surface to be protected before cutting, because a trimmed pad cannot be returned to its original size.
Features and Benefits
Versatile Protection
- Spot Protection: cut pieces protect arm pads, foot plates, head rests, leg rests, splints, and braces.
- Cushion Topper: a full-size pad over a custom base enhances the base cushion's pressure and shear properties.
- Shear Management: the polymer surface reduces friction and shear wherever it is placed.
Material and Handling
- Akton Polymer Sheet: the same ultra-soft, shock-absorbing polymer used across the Action cushion line.
- No Cover Included: the bare sheet trims cleanly and wipes down, and a Basic Cover is sold separately for 1/2 and 5/8 inch pads.
- Trimmable: cut with ordinary scissors to the exact footprint a surface requires.
Product Specifications
Product Specifications
- Brand: Action Products
- Product Line: Adaptive Flat Pad
- Material: Akton polymer
- Thickness Options: 5/8 inch or 1/2 inch, depending on configuration
- Configurations: 18 x 16 inch, 16 x 18 inch, and 18 x 18 inch
- Cover: Not included (Basic Cover available separately)
- Latex: Not made with natural rubber latex
Compliance and Care
- Country of Origin: Made in USA
- TAA Compliance: TAA compliant
- Care: Wipe clean (per the Care and Use guide)
- Warranty: Coverage against defects in materials and workmanship at the time of initial purchase
Browse the full Seating Solutions range, or shop everything from Action Products.
Why Therapists Keep a Flat Pad on Hand
A stocked flat pad solves problems the day they appear, without waiting for a custom fabrication. One sheet can become heel protection in the morning and a seat topper in the afternoon, which is why seating clinics treat it as a staple supply.
- Cut It Your Way – no other Action product can be shaped to a foot plate, a splint, and a seat from a single SKU, a true differentiator.
- Pure Polymer – nothing but Akton polymer through the full thickness, so trimmed edges protect as well as the center.
- Cover When Wanted – the optional Basic Cover fits these thicknesses when a finished, non-slip surface is preferred.
- Made in the USA – made in the USA by Action Products, a third-generation company built on Akton polymer.
Frequently Asked Questions
What can the Adaptive Flat Pad be used for?
It has multifunctional applications for traditional and non-traditional seating challenges. Full-size pads go on top of custom wheelchair cushion bases, and cut pieces provide spot protection on arm pads, foot plates, head and leg rests, and splints or braces.
Can the pad be cut to size?
Yes. Cutting the sheet to fit a specific surface is one of its intended uses. Measure carefully before cutting, and remember that small offcuts still make useful spot-protection pieces.
Does the flat pad include a cover?
No. Adaptive Flat Pads are not sold with a cover. A Basic Cover may be purchased separately for the 1/2 inch and 5/8 inch thicknesses. No cover is available for the 1/4 inch thickness.
Which thickness should I choose?
The 5/8 inch configurations give the most immersion and protection, while the 1/2 inch pad fits where clearance is tight or a slimmer layer is preferred. Both are pure Akton polymer, so the choice is about fit and protection level rather than material.
Is the pad made with natural rubber latex?
No. The Adaptive Flat Pad is not made with natural rubber latex.
What warranty covers the Adaptive Flat Pad?
Action Products documents coverage for its Adaptive Flat Pads at the time of initial purchase. Warranted to be free of defective materials and workmanship at the time of initial purchase.