Description
The Drive Bed Sensor Pad Alarm is a complete fall-prevention alarm system for a bed: a pressure-sensitive pad that lies across the mattress under the user, a monitor with two volume settings, and a 9V battery — everything included. When the user leaves the bed, the alarm sounds until they return or the unit is switched off.
- Complete system – bed pad, alarm monitor and 9V battery all included; nothing else to buy
- Sounds the moment pressure leaves – continuous alarm until the user returns or the unit is switched off
- Two volumes – 85 dB Low or 100 dB Hi, set for the room and the caregiver's distance
- Low-battery warning – an LED plus a beep every 30 seconds so the system is never silently dead
An Early Warning When a Bed User Gets Up Alone
Night-time falls usually start with a patient or loved one quietly swinging their legs out of bed. The pad lies across the mattress at torso level; while the user is in bed, the system is silent. The moment their weight leaves the pad, the monitor alarms — continuously — giving a caregiver time to arrive before a fall. There is no reset button on this model: the alarm stops when the user is back in bed or the monitor is switched off, which keeps anyone from silencing it and forgetting it.
Features and Benefits
Detection and Alarm
- Pressure-sensitive bed pad – 11 × 30 in pad sized to span a bed at torso level
- Continuous alarm – sounds until pressure returns or the unit is switched off; no reset button to defeat it
- 85 dB / 100 dB volume settings – Low and Hi, chosen with a switch on the monitor
Power and Connections
- 9V battery included – works out of the box; low-battery LED and a beep every 30 seconds when it runs down
- Telephone-jack pad connection – the pad cord plugs into the monitor
- Accessory-ready – an optional nurse-call cable and the 136DC AC adapter are available from Drive (not included)
Product Specifications
System
- Included: Bed sensor pad, alarm monitor, 9V battery
- Pad size: 11 in × 30 in (bed)
- Reset: None — alarm stops when the user returns or the unit is switched off
Alarm and Power
- Volume: 85 dB (Low) / 100 dB (Hi)
- Power: 9V battery (included); optional 136DC AC adapter (not included)
- Low battery: LED indicator with beep every 30 seconds
- Warranty: Alarm 1 Year Limited; pad 6 Month Limited
Browse the wider mobility aids range at MedicalEx for the beds, lifts and daily-living equipment this alarm works alongside.
Why Choose the Drive Bed Sensor Pad Alarm?
It is the straightforward version of bed fall prevention: pad, monitor and battery in one box, an alarm that cannot be reset-and-forgotten, and two volume levels so it can be heard where the caregiver actually is.
Manuals and Troubleshooting Guides
Frequently Asked Questions
What is in the box?
The pressure-sensitive bed pad, the alarm monitor, and a 9V battery — a complete working system.
How does the alarm stop?
This model has no reset button. The alarm sounds continuously while the pad is unoccupied and stops when the user is back in bed or the monitor is switched off.
How loud is it?
Two settings: 85 dB on Low and 100 dB on Hi. Choose Hi when the caregiver is in another room.
Where does the pad go?
Across the mattress at the user's torso level, under the sheet. Route the cord safely to the monitor so it cannot be tripped over or pulled out.
How do I know the battery is dying?
The monitor lights a low-battery LED and beeps every 30 seconds. Replace the 9V battery then — or run it on Drive's optional 136DC AC adapter (not included).
What warranty does it carry?
The alarm monitor carries a 1 Year Limited warranty and the pad a 6 Month Limited warranty, per Drive.
