Description
The Pin Cutter from BR Surgical is built for cutting pins and hard wire in orthopedic procedures. Wire Cutter, 2.0mm soft wire, 1.6mm hard wire, double action, 7" TC.
- Pattern: TC double-action jaws, 2.0 mm soft and 1.6 mm hard capacity
- Size: 7 inches long
- Tungsten Carbide Jaws: TC faces cut hardened pin stock and keep their edge
- Double-Action Hinge: Compound joint multiplies force for hard wire cuts
- 2.0 mm Soft and 1.6 mm Hard Capacity: Rated for the standard pin and K-wire range
- Material: German stainless steel
Pin Cutter - A TC Pin Cutter With Double-Action Jaws
This pin cutter carries tungsten carbide jaws rated for soft wire to 2.0 mm and hard wire to 1.6 mm, covering the common pin and K-wire sizes. The double-action hinge multiplies hand force at the jaws, so hardened pin stock parts instead of crushing. Gold handles mark the TC pattern so the cutter is easy to pick out on the tray. The manufacturer's device record describes this catalog number as follows: Wire Cutter, 2.0mm soft wire, 1.6mm hard wire, double action, 7" TC
Features and Benefits
- Tungsten Carbide Jaws: TC faces cut hardened pin stock and keep their edge
- Double-Action Hinge: Compound joint multiplies force for hard wire cuts
- 2.0 mm Soft and 1.6 mm Hard Capacity: Rated for the standard pin and K-wire range
- Reusable Construction: Solid german stainless steel build made to be cleaned and sterilized between cases
- Pattern Fidelity: Ground and finished to the Pin Cutter pattern so it handles like the instrument it replaces
Product Specifications
Design
- Pattern: TC double-action jaws, 2.0 mm soft and 1.6 mm hard capacity
- Size: 7 inches long
- Material: German stainless steel
- Finish: Satin finish that cuts glare under procedure lights
Use and Care
- Sterility: Supplied non-sterile, sterilize before use
- Reprocessing: Clean and sterilize between cases following the facility instrument protocol
- Sold As: Each
- Warranty: Lifetime instrument warranty from BR Surgical, covering defects in material and workmanship for the life of the product
Browse related instruments in our Surgical Instruments department and the BR Surgical brand page for the full line.
Why Choose the Pin Cutter?
Facilities stock the Pin Cutter when they want the correct pattern from the manufacturer of record, in a build that holds up to daily reprocessing. It arrives non-sterile and ready for the tray after standard preparation.
- Sold as Each: One instrument per order unit for straightforward tray stocking and reordering
- Tray-Ready Pattern: A true Pin Cutter pattern that drops into existing sets without changing technique
- Reprocessing Friendly: German stainless steel construction stands up to routine cleaning and steam sterilization
- Consistent Sourcing: One catalog number from BR Surgical, the manufacturer of record for this instrument
- Lifetime Coverage: Backed by the BR Surgical lifetime instrument warranty against defects in material and workmanship
Frequently Asked Questions
- What size wire can it cut?
- It is rated for soft wire to 2.0 mm and hard wire to 1.6 mm, which covers the K-wires and pins used on most orthopedic trays.
- Why tungsten carbide jaws?
- Hardened pins dull plain steel jaws quickly, while TC faces keep a cutting edge through repeated hard wire work.
- Is it sold as a single instrument?
- Yes, it is sold as each, one instrument per order unit, under a single catalog number.
- Is it sterile on arrival?
- No, it is supplied non-sterile and is cleaned and sterilized before use under the facility instrument protocol. It is a reusable instrument made for repeated reprocessing.
- What warranty covers it?
- BR Surgical covers this instrument under its lifetime instrument warranty against defects in material and workmanship for the life of the product. The full warranty statement is in the specifications above.