Description
The Cable, Limb Lead ECG, AAMI, Propaq MD from ZOLL is the ECG patient cable that carries the ECG signal from the patient electrodes to the monitor or defibrillator. Compatibility covers Propaq, X Series and X Series Advanced for this ECG patient cable (part 8300-0803-01), as listed in the specifications below.
- Response-bag staple – a wear item that ALS bags and code carts replace on condition
- Specified compatibility – listed by ZOLL for Propaq, X Series and X Series Advanced
- Catalogued part – manufacturer part number 8300-0803-01, sold exactly as listed
Main Description
In service, this ECG patient cable (part 8300-0803-01) carries the ECG signal from the patient electrodes to the monitor or defibrillator, and it does so as the exact component ZOLL specifies rather than a generic substitute. Compatibility is generation-specific across the ZOLL line, and this item (part 8300-0803-01) is listed for Propaq, X Series and X Series Advanced. Programs typically keep this ECG patient cable (part 8300-0803-01) on the standard stocking list so a used or expired unit never leaves a gap in the response setup. It is sold as listed (package: ea) per the packaging section, with the manufacturer part number 8300-0803-01 tying the listing to the ZOLL catalog entry. Ordering the specified ECG patient cable (part 8300-0803-01) instead of an equivalent-looking substitute protects the performance the platform was validated with.
Features and Benefits
Ecg patient cable Design
- Signal-chain component – cable quality shows directly in trace quality on the monitor
- Platform-matched – connector and lead configuration specified for the listed ZOLL devices
Use and Fit
- Platform fit – specified for Propaq, X Series and X Series Advanced
- Replenishment – restock this ECG patient cable on use or expiry to keep the setup complete
- Specified part – the exact ZOLL-catalogued component for this role, not a third-party equivalent
Product Specifications
Identifiers and Packaging
- Manufacturer part number: 8300-0803-01
- Packaging: ea
- Brand: Zoll Medical
Compatibility
- Compatible devices: Propaq, X Series and X Series Advanced
Browse related equipment in our Professional diagnostic and resuscitation equipment range, and see the full brand line at ZOLL Medical.
Why Choose This Product
Accessories decide whether a ZOLL platform performs the way it was validated to perform. This ECG patient cable (part 8300-0803-01) is the component ZOLL itself catalogs for this role, so fit and specification are settled questions instead of gambles.
- Specified performance – the ECG patient cable ZOLL validated for Propaq, X Series and X Series Advanced performs to the platform specification
- Fewer failures in service – correct connectors and specifications remove the intermittent faults that generic substitutes introduce
- Catalogued by ZOLL – this is the exact item in the ZOLL accessory catalog for these platforms, sourced as listed
- Program continuity – stocking this ECG patient cable by part number keeps every site in the program identically equipped
Frequently Asked Questions
Which devices is this ECG patient cable compatible with?
ZOLL lists this ECG patient cable (part 8300-0803-01) for Propaq, X Series and X Series Advanced. Match that list against your platform before ordering part 8300-0803-01, because ZOLL accessory configurations differ between device generations.
What is the Cable, Limb Lead ECG, AAMI, Propaq MD used for?
It is the ZOLL ECG patient cable (part 8300-0803-01) that carries the ECG signal from the patient electrodes to the monitor or defibrillator. The specifications on this page give the part number, packaging and listed compatibility for part 8300-0803-01.
How is this item packaged?
Sold as listed: ea (SKU 8300-0803-01). The Packaging and Ordering section repeats the exact package format for part 8300-0803-01, and the price shown is the price for that package.
Is this a genuine ZOLL item?
MedicalEx supplies the item exactly as ZOLL catalogs it for the listed platforms, under manufacturer part number 8300-0803-01. Part 8300-0803-01 is the genuine catalogued item, not a third-party equivalent or a refurbished substitute.
When should an ECG cable be replaced?
Replace it when traces show artifact that follows the cable, when connectors loosen, or when the jacket is damaged (part 8300-0803-01). For part 8300-0803-01, the listed configuration on this page is the one that guidance assumes.
Packaging and Ordering
Sold as listed: ea (SKU 8300-0803-01). The price shown is the price for this package format, and part 8300-0803-01 identifies the item in the ZOLL catalog.
