Description
The Doran DS9100-RAMP Second Ramp adds the exit ramp that turns the DS9100 into a roll-through station. With ramps on both sides, a wheelchair rolls on, weighs, and rolls off in one straight path with no turning on the platform. Clinics weighing chair patients all day remove the reverse-off maneuver that slows every encounter and stresses transfers.
- Roll-Through Weighing – Entry and exit ramps let the chair keep moving forward, which shortens each weighing.
- Wider Station Footprint – With two ramps extended, the DS9100 spans 65 in wide, a layout figure for room planning.
- Made for the DS9100 – The ramp is the manufacturer option listed for the DS9100 platform, so slope and fit match.
- No Platform Turning – Chairs avoid tight turns on the weighing surface, which protects both patient and scale.
The Exit Ramp That Completes the DS9100 Station
The standard DS9100 ships with a single ramp, and patients back off the platform after weighing. Adding the second ramp converts that routine into a forward roll-through, the path wheelchair users handle most easily. The ramp matches the platform 2.5 in profile, keeping the slope gentle at both ends of the station. For bariatric wheelchairs near the platform size limit, a straight path also removes turn clearance worries. Facilities that add the ramp later keep the original scale and simply extend its working footprint.
Features and Benefits
Access
- Straight Path On and Off – Forward exit removes reversing and turning from the weighing routine.
- Gentle Matching Slope – The ramp meets the 2.5 in platform profile, so the climb stays low at both ends.
Fit
- Manufacturer Option – Doran lists the second ramp by this part number for the DS9100, which guarantees the pairing.
- Retrofit Friendly – The ramp adds to an installed DS9100 without replacing the scale.
Product Specifications
Compatibility
- Fits: Doran DS9100 Wheelchair Scale
- Station Width with Two Ramps: 65 in W x 42 in D x 46.5 in H
- Platform Profile: 2.5 in H
See all Medical Scales Accessories or Shop more Doran Products.
Why Choose the DS9100 Second Ramp
Backing a wheelchair off a platform is the slowest and least comfortable part of a single-ramp weighing. The second ramp replaces it with a straight roll-through, which is faster for staff and easier for the patient.
- Faster Encounters – Forward exit removes the reverse maneuver, which returns minutes across a clinic day.
- Easier for Patients – Rolling forward is the natural direction for chair users, which lowers transfer stress.
- Keeps the Existing Scale – The ramp extends the installed DS9100, so no replacement purchase is needed.
Manuals and Troubleshooting Guides
Frequently Asked Questions
Which scale does this ramp fit?
The second ramp is the manufacturer option for the Doran DS9100 wheelchair scale.
What does the second ramp change?
With ramps on both sides, wheelchairs roll on and off in a straight forward path instead of backing off the platform.
How wide is the station with both ramps?
With two ramps extended, the DS9100 measures 65 in wide by 42 in deep by 46.5 in high.
Is the scale included?
No. This is the second ramp accessory only. The DS9100 scale is sold separately.
Where is the DS9100 documented?
The DS9100 spec sheet and user manual are linked in the Manuals section and list this ramp as an option.
