Description
Exel IV Administration Sets – 78 Inch Tubing, Y Injection Site, Vented or Non-Vented, Case of 50
The Exel IV Administration Sets run primary infusions on 78 inch tubing with a Y injection site. One set design runs vented or non vented, so the same shelf item serves glass bottles and bags. The Y injection site accommodates multiple fluid sources without a second line.
- 15 drop/mL and 60 drop/mL chambers, 78 inch and 105 inch tubing
- Y injection site, with a needle free option and a two site 105 inch set
- Combination vented and non vented drip chamber on every set
- Roller clamp and occlusion clamp for flow control
Exel IV Administration Sets with 15 and 60 Drop Chambers
The 78 inch sets carry a priming volume of about 23 mL, with tubing of 3.0 mm inside diameter and 4.1 mm outside diameter. Every configuration pairs a roller clamp with an occlusion or pinch clamp for controlled delivery. Luer slip, luer lock and option lock connectors cover the connection styles units already use. The needle free variant swaps the Y site for a needle free injection site on the same 15 drop platform. The fluid path is sterile, non toxic and non pyrogenic, and the sets are not made with DEHP or natural rubber latex. Sets arrive in pouch packaging, 50 per case.
Features and Benefits
Set Configuration
- Combination Vented Chamber – the drip chamber runs vented or non vented as the container requires.
- Y Injection Site – the site accommodates multiple fluid sources on one line.
- Two Lengths – 78 inch standard tubing plus a 105 inch set with two Y sites.
Flow Control and Safety
- Roller and Occlusion Clamps – paired clamps give coarse and positive flow control.
- DEHP Free Fluid Path – not made with DEHP, and the build uses no natural rubber latex.
- Pouch Packaging – each set is pouch packed, sterile and ready to hang.
Product Specifications
Package and Sterility
- Packaging: 50 pieces per case
- Case Quantity: 50
- Case Weight: 4.31 lbs (1.95 kgs)
- Case Dimensions: Length: 15 in x Width: 9 in x Height: 8 in (381 mm x 229 mm x 203 mm)
See all IV Administration Sets for the full range, or Shop more Exel Products for the complete line.
Why Infusion Units Stock Exel IV Administration Sets
Standardizing the primary set simplifies training and stocking across an infusion service. Exelint covers drop factors, connectors and a needle free site inside one set family. One family covers nearly every primary set the service hangs.
- Two Drop Factors – 15 drop/mL for standard infusion and 60 drop/mL for controlled low volume delivery.
- Needle Free Option – one variant adds a needle free Y site for needleless protocols.
- Connector Choice – luer slip, luer lock and option lock ends match existing pumps and hubs.
- Long Reach Set – the 105 inch two site set reaches around beds and pumps.
Manuals and Troubleshooting Guides
Frequently Asked Questions (FAQs)
What drop factors are offered?
Sets come in 15 drop/mL and 60 drop/mL, both with the combination vented and non vented chamber.
How long is the tubing?
Standard sets run 78 inches with about 23 mL priming volume. One 15 drop set runs 105 inches with two Y sites.
Is there a needle free option?
Yes. One 15 drop/mL variant carries a needle free Y injection site with an option lock connector.
Do the sets contain DEHP or latex?
No. The manufacturer states the sets are not made with DEHP or natural rubber latex.
How are sets packaged?
Each set is pouch packed and cases hold 50 sets.
