Description
Gomco Hydrophobic Filter 3100 is a disposable hydrophobic bacteria filter for Gomco aspirators, threading into a 1/8 inch NPT port on one side and taking 1/4 inch suction tubing on its hose barb. The threaded connection makes it the fixed filter of the Gomco mobile and tabletop lines rather than an in-line add-on.
- Threads into 1/8 inch NPT ports
- 1/4 inch hose barb outlet
- Hydrophobic pump protection
- Pack of 3
The Threaded Filter of the Gomco Line
Mobile Gomco aspirators build the filter into the suction path at a threaded port, and this is that filter: NPT in, hose barb out. The hydrophobic membrane keeps fluid and aerosol out of the diaphragm pump while air passes freely. It is listed across the Gomco general use, gastric, uterine and tabletop aspirator pages because the whole line shares the fitting. Keeping a pack on the shelf means a wet filter never sidelines a pump.
Features and Benefits
- Inlet: 1/8 inch NPT thread
- Outlet: 1/4 inch hose barb
- Function: Hydrophobic bacteria filtration ahead of the pump
- Compatibility: Gomco mobile and tabletop aspirators with the threaded filter port
- Packaging: 3 per pack
Product Specifications
Identification
- Manufacturer: Allied Healthcare (Allied Medical LLC)
- Part Number: 01-90-3100
Complete the workstation with matching pieces from Hospital Supplies and the wider Allied Healthcare catalog, all stocked at MedicalEx.
Why Gomco Shops Stock the Threaded Filter
It is a wear item by design: it sacrifices itself to keep the pump dry. The threaded version belongs to the Gomco fleet specifically, and no substitute fitting protects the pump the same way.
- Made for the Gomco threaded port
- Sacrificial protection for the pump
- Shared across the Gomco line
- Pack of 3
Manuals and Troubleshooting Guides
Frequently Asked Questions
Which aspirators use this filter?
Gomco aspirators with the threaded filter port, including the general use, gastric drainage, uterine and tabletop 300 lines. The specifications above carry the complete details for part 01-90-3100.
How is it different from the barb filter?
This version threads into a 1/8 inch NPT port on one side. The 01-90-3928 version connects with hose barbs at both ends for in-line use.
When should it be replaced?
When it gets wet, when vacuum drops, or on the schedule in the aspirator manual. See the specification section above for the full part 01-90-3100 listing.
How is it sold?
In packs of 3. Confirm the specifications for part 01-90-3100 on this page before ordering.
Does the pump need it?
Yes. Gomco specifies the filter in the suction path to protect the pump from fluid and aerosol carryover.