Description
The IPU Elite Shower Chair keeps hygiene care seated, supported, and easier to manage. This configuration, with a 21 inch seat width and a 325 lb weight capacity, suits residents who need a supported seat for every shower.
- 325 lb weight capacity for the seated user
- 21 inch seat width for patient comfort
- Healthcare-grade PVC frame that cannot rust
The IPU Elite Shower Chair in the Shower Room
With a 21 inch seat width and a 325 lb weight capacity, this shower chair is specified for residents who need a supported seated shower. The configuration combines a 21 inch seat width, fixed arms and a with backrest in one unit.
The ELT817 B is one of the PVC designs IPU has built in Michigan since 1985. Surfaces on the ELT817 B are smooth and sealed, so staff can sanitize the whole chair in a few minutes.
Features and Benefits
Seating and Support
- Healthcare-Grade PVC Frame: Will not rust or corrode in shower rooms
- Wet-Room Construction: Built for total wet service and daily disinfecting
- Seated Support: Supports the patient through assisted bathing
Frame and Care
- Easy Sanitation: Smooth surfaces wipe or hose clean between residents
- Facility Heritage: Made by IPU, the originator of PVC healthcare equipment since 1985
Product Specifications
Product Details
- Brand: IPU
- Manufacturer: Innovative Products Unlimited
- Model Number: ELT817 B
- Product Type: Shower Chair
- Sold As: SKU ELT817 B, sold as each
Dimensions and Capacity
- Seat Width: 21 inches
- Weight Capacity: 325 lbs
- Arms: Fixed Arms
- Backrest: With Backrest
Browse the full Shower Chairs & Stools range for related equipment. The IPU brand page covers the rest of the ELT817 B line.
Why Choose This Product
The ELT817 B descends from the PVC healthcare equipment IPU invented in 1985. The IPU Elite Shower Chair comes from the company that started PVC healthcare equipment in 1985.
- Rust-Free Service Life: The PVC frame cannot rust, so the chair outlasts metal chairs in wet rooms
- Fast Turnaround: Staff sanitize the whole chair in minutes between residents
- Originator of the Category: IPU has built PVC healthcare equipment since 1985
- Parts Support: Casters, seats, pails, and backrests are replaceable instead of scrapping the chair
Frequently Asked Questions
Can this chair be used in a standard shower stall?
Yes, the ELT817 B is sized for facility shower stalls and rolls or carries into place. Measure the stall and doorway against the ELT817 B specifications before ordering. The specifications above give the ELT817 B numbers that apply.
How is the chair cleaned between residents?
Clean the ELT817 B with a standard disinfectant wipe-down or a full hose rinse. The ELT817 B tolerates both and can go straight back into service. For the ELT817 B, the specifications on this page carry the exact figures.
Does the chair need assembly?
Setup for the ELT817 B is minimal and needs only basic tools. Most facilities have the ELT817 B in service the day it arrives. Check the ELT817 B specifications above for the numbers that apply to this configuration.
Are replacement parts available?
Yes, the ELT817 B is supported with replacement casters, seats, and pails. Facilities typically repair the ELT817 B for years rather than replace it. The ELT817 B listing's specifications confirm the details for this exact unit.
Who is this chair intended for?
The ELT817 B serves residents who cannot stand safely through a shower. Match the user to the capacity listed for the ELT817 B before use. On the ELT817 B, those details are spelled out in the specifications section.