Description
LSP Constant Flow Selector Valve is a constant flow selector valve from LSP that delivers oxygen at fixed, repeatable settings of 2, 4, 6, 10 and 15 lpm through a DISS outlet. It is the working valve of the LSP Multilator and Minilator mass-casualty oxygen systems, and it serves anywhere a set flow must not drift.
- Five fixed flow settings
- DISS outlet connection
- Core valve of the Multilator system
- Positive settings that cannot drift
Fixed Flows for Multi-Patient Oxygen
Mass-casualty oxygen delivery cannot rely on reading ten flowmeter floats in the dark, so the selector valve replaces the float with fixed orifices chosen by a positive selector. Each setting delivers its rated flow as long as supply pressure holds, which lets one attendant verify a whole row of patients by the selector positions alone. The valve inlets on 1/8 inch female NPT and outlets on oxygen DISS, the standard pairing of the Multilator manifold. Outside mass-casualty work, the same fixed-flow discipline suits training rigs and multi-bed oxygen manifolds.
Features and Benefits
- Flow Settings: 2, 4, 6, 10 and 15 lpm
- Inlet: 1/8 inch female NPT
- Outlet: Oxygen DISS
- System Role: Patient valve of the LSP Multilator and Minilator systems
Product Specifications
Identification
- Manufacturer: LSP (Allied Healthcare)
- Model: L233
Complete the workstation with matching pieces from Hospital Supplies and the wider Allied Healthcare catalog, all stocked at MedicalEx.
Why Mass-Casualty Systems Are Built on This Valve
When one oxygen source feeds many patients, flow discipline is safety. Fixed settings cannot be bumped out of calibration, and a glance down the row confirms every patient flow at once.
- Fixed orifice settings, no float to read
- Feeds from manifolds and Multilator systems
- DISS outlet for standard masks and tubing
- One valve per patient position
Manuals and Troubleshooting Guides
Frequently Asked Questions
What flows does it deliver?
Five fixed settings: 2, 4, 6, 10 and 15 lpm, selected at the valve. The specifications above carry the complete details for part L233.
What systems use this valve?
It is the patient valve of the LSP Multilator eight-patient system and the Minilator manifold, and it works in any fixed-flow manifold setup. See the specification section above for the full part L233 listing.
How does it connect?
The inlet is 1/8 inch female NPT and the outlet is an oxygen DISS fitting for standard masks and tubing. Confirm the specifications for part L233 on this page before ordering.
Does it need calibration?
The flows are set by fixed orifices rather than an adjustable mechanism, so there is no calibration to drift. The specifications above carry the complete details for part L233.
Can it run from a standard regulator?
Yes, provided the supply holds the pressure the manifold design calls for. It is most often fed by a manifold or a Multilator system.