Description
The MARS LibertyBOSS Amalgam Separator Wet Starter Kit, the LibertyBOSS wet starter kit, is a complete amalgam separator starter kit built for wet vacuum systems from MARS Bio-Med, made for dental practices adding amalgam separation to a wet vacuum system for the first time. Dental practices reach for the LibertyBOSS wet starter kit when first-time EPA amalgam compliance on a wet vacuum line matters more than improvising with the wrong supply. The LibertyBOSS wet starter kit keeps the routine simple, so attention stays on the work itself instead of the equipment.
- ISO 11143 certified – the separator is tested and certified to the ISO 11143 amalgam separation standard
- 99.9 percent separation – it removes 99.9 percent of mercury from the wastewater stream, including both soluble and insoluble amalgam
- Zero loss of suction – the practice keeps full vacuum power while the separator runs
- Matched hose set – a 1 in flex hose (3 ft) and a 1 1/4 in flex hose (3 ft) sized for wet vacuum plumbing
- Fittings included – a 1.5 in 90 degree street elbow, a 1 3/4 in reducer bushing and 2 pairs of gator locks complete the hookup
About This LibertyBOSS Amalgam Separator Wet Starter Kit
The libertyBOSS Amalgam Separator Wet Starter Kit comes from MARS Bio-Med as part number MA-0101-WET, with the package configuration stated plainly on this listing. For this LibertyBOSS wet starter kit, it pairs the sealed LibertyBOSS separator with the hoses, elbow, reducer bushing and gator locks a wet vacuum installation takes. On the job, Order it for a first LibertyBOSS installation on a wet vacuum system, and plan on under an hour for the complete setup. It is sold as listed: 1 kit. Because the configuration of MA-0101-WET never changes between orders, par levels are easy to keep accurate.
Features and Benefits
Separation Performance
- ISO 11143 certified – the separator is tested and certified to the ISO 11143 amalgam separation standard
- 99.9 percent separation – it removes 99.9 percent of mercury from the wastewater stream, including both soluble and insoluble amalgam
- Zero loss of suction – the practice keeps full vacuum power while the separator runs
Wet Vacuum Installation Kit
- Matched hose set – a 1 in flex hose (3 ft) and a 1 1/4 in flex hose (3 ft) sized for wet vacuum plumbing
- Fittings included – a 1.5 in 90 degree street elbow, a 1 3/4 in reducer bushing and 2 pairs of gator locks complete the hookup
- Fast setup – most first installations finish in under 1 hour
Compliance and Recycling
- Recycling included – MARS handles 100 percent of the recycling process at end of life
- Certificate of compliance – a certificate of compliance and a warranty registration card are included in the kit
- Automatic reminder – an automatic compliance reminder tracks the replacement timeline
Product Specifications
Separator
- Separator Type: Type 2 amalgam separator
- Certification: ISO 11143 certified
- Separation Efficiency: 99.9 percent removal of mercury, including soluble and insoluble amalgam
- Maximum Fill Level: 3.0 litres (105.8 oz)
- Maximum Flow Rate: 1,000 ml/min
- Construction: Sealed unit with no filters and no moving parts
- Maintenance: Zero maintenance, the unit is never opened
- Service Life: Up to 3 years for 1 to 3 chairs, up to 2 years for 4 to 9 chairs, up to 1 year for 10 to 16 chairs
- Compatibility: Wet vacuum systems
Package
- Package Content: LibertyBOSS amalgam separator, 1 in flex hose (3 ft), 1 1/4 in flex hose (3 ft), 1.5 in 90 degree street elbow, 1 3/4 in reducer bushing, 2 pairs of gator locks, amalgam separator recycling, warranty registration card, certificate of compliance and automatic compliance reminder
- Sold As: 1 kit
- Manufacturer Part Number: MA-0101-WET
Browse the full Dental Supplies range, or shop everything from MARS Bio-Med.
Why Choose This LibertyBOSS Amalgam Separator Wet Starter Kit
What separates the LibertyBOSS wet starter kit from look-alike listings is accountability: one manufacturer, one part number, one stated package. For this LibertyBOSS wet starter kit, the wet vacuum hose sizes, reducer bushing and fittings are already in the box, so a first-time installation finishes in one visit with no parts run. Buyers who have been burned by substitutions tend to notice the difference in MA-0101-WET.
- One-visit compliance – a first wet vacuum installation finishes in under an hour with every fitting in the box
- Suction stays strong – full vacuum power is preserved while the separator runs, so operatories never slow down
- End-of-life handled – recycling, the certificate of compliance and the reminder are part of the kit, not extra errands
- Sized for wet lines – the hose set and reducer bushing are matched to wet vacuum plumbing, unlike universal kits that need extra adapters
Frequently Asked Questions
What is the MARS LibertyBOSS Amalgam Separator Wet Starter Kit used for?
As the LibertyBOSS wet starter kit, it is a complete amalgam separator starter kit built for wet vacuum systems, used for dental practices adding amalgam separation to a wet vacuum system for the first time. the first LibertyBOSS installation on a wet vacuum system.
What is included in the package?
The listing is sold as listed: 1 kit. The manufacturer part number is MA-0101-WET, so checking an order against this page takes seconds.
Who is this product made for?
Dental practices are the typical buyers of the LibertyBOSS wet starter kit, using it for dental practices adding amalgam separation to a wet vacuum system for the first time. It suits both stocked supply rooms and smaller practices that order the LibertyBOSS wet starter kit as needed.
Who can install the starter kit?
Anyone with basic mechanical aptitude can install the separator by following the step-by-step instructions included on delivery, or a dental service technician can fit it. A complete first installation takes up to about 1 hour depending on the plumbing layout.
Where can I find the full specifications?
The Product Specifications section on this page lists the grounded manufacturer details for MA-0101-WET, including the part number and package configuration. The Features and Benefits section explains what those details mean for the LibertyBOSS wet starter kit in daily use.
Is this a genuine MARS Bio-Med product?
Yes, MA-0101-WET is a genuine MARS Bio-Med item, entered under the manufacturer's own part number. MARS Bio-Med handles 100 percent of the separator recycling process and the compliance paperwork for the practice, and that backing covers the LibertyBOSS wet starter kit on this listing.
How does shipping work for this item?
The wet starter kit MA-0101-WET ships directly from MARS Bio-Med under a drop ship program rather than from a MedicalEx warehouse shelf. The separator, hoses and fittings arrive exactly as listed on this page.
