Description
The PARI PRONEB Max Replacement Air Filters are the genuine filter set PARI specifies for the PRONEB Max compressor. Each set pairs a fresh intake filter with its filter cap, so the swap happens at the front of the unit in seconds. Clean intake air is what lets the compressor deliver the airflow its matched nebulizer was built around.
- Genuine PARI filter set, part 130F1002P2
- Filter and filter cap included in the set
- Replaced every 6 months, or sooner if wet or grey
Clean Intake Air Keeps the PRONEB Max Breathing Easy
The PRONEB Max draws its treatment air through the small filter seated at the front of the housing. That filter traps household dust before it can reach the compressor, and it slowly turns from bright white to grey as it loads up. PARI designs the filter to be checked without removing it, so a glance at the front of the unit tells you when a change is due. A clogged or wet filter starves the compressor of air and weakens the aerosol the nebulizer produces. Swapping in this genuine set on the six-month cycle keeps airflow, treatment times, and compressor life where they belong.
Features and Benefits
- Genuine PARI Part: Original replacement filter set made for the PRONEB Max compressor
- Filter Cap Included: Set pairs the intake filter with the cap that seats it in the housing
- Visual Wear Check: New filter is bright white and turns grey as it traps dust
- Tool-Free Swap: Old filter and cap pull straight out of the front of the unit
- Matched Airflow: Intake resistance stays at the level the compressor expects
Product Specifications
Product Details
- Brand: PARI
- Manufacturer: PARI Respiratory Equipment, Inc.
- Model Number: 130F1002P2
- Product Type: Compressor air filter set
- Sold As: Pack of 2
Compatibility and Service
- Compatible Compressor: PARI PRONEB Max
- Replacement Interval: Every 6 months, or immediately if wet or clogged
- Set Contents: Intake filter and filter cap
Browse Hospital Supplies for the rest of the respiratory therapy shelf. The PARI brand page gathers every PARI product carried at MedicalEx.
Why Choose Genuine PARI PRONEB Max Filters
Compressor makers size their intake filters to the airflow the pump expects over years of daily treatments. This genuine PARI set matches the PRONEB Max filter seat and cap exactly, so nothing about the swap is improvised.
- Exact fit for the PRONEB Max filter seat and cap
- Color change turns the replacement check into a glance
- Six-month rhythm matches the reusable nebulizer change
- An original PARI part rather than a generic foam substitute
Manuals and Troubleshooting Guides
Frequently Asked Questions
How often should the PRONEB Max filter be replaced?
PARI sets the rhythm at every 6 months, the same visit as the reusable nebulizer change. Replace it sooner if the filter gets wet or becomes clogged.
How do I know the filter is worn out?
A new filter is bright white, and it turns grey as it traps dust from the intake air. The filter can be inspected from the front of the compressor without removing it.
What comes in this set?
The set includes the replacement intake filter and its filter cap. Both pieces are swapped together at the front of the PRONEB Max housing.
Is this the right filter for my compressor?
This set is part 130F1002P2, the replacement PARI specifies for the PRONEB Max. Other PARI compressors take different filter sets, so match the part number in your manual before ordering.
Can I wash the old filter and keep using it?
No, this filter is a replaceable consumable rather than a washable part. A filter that has gotten wet must be replaced right away, because moisture blocks the intake air.