Description
The Puritan Foam Tipped Applicator is a foam applicator in a 6 inch format with a polypropylene handle made by Puritan Medical Products in Guilford, Maine. In busy clinical and laboratory settings, a foam applicator in a 6 inch format with a polypropylene handle saves repeat work and keeps results consistent from one patient or sample to the next. Clinics and laboratories use it for cleaning and surface preparation.
- Standard Foam Tip – Reticulated medical grade foam holds and releases fluids evenly, and its open-cell structure wipes surfaces without leaving lint behind. Here the standard tip is paired with a polypropylene handle in a 6 inch format, and the format is stocked as 50 per pack.
- Polypropylene Handle – The polypropylene handle flexes slightly under pressure, which helps when wiping or reaching contoured surfaces. On this format it is paired with a standard foam tip and stocked as 50 per pack.
- Non-Sterile Bulk Format – The non-sterile format of this foam applicator in a 6 inch format with a polypropylene handle suits high-volume work where sterile packaging is not required, which keeps cost per task low.
Built for the Collection and Application Work Labs Do Daily
This foam applicator in a 6 inch format with a polypropylene handle is one of more than 1,200 single-use products Puritan manufactures in Maine, and its format is dedicated to a specific job rather than adapted from a general-purpose design. The standard foam tip is the working end of this foam applicator in a 6 inch format with a polypropylene handle: Reticulated medical grade foam holds and releases fluids evenly, and its open-cell structure wipes surfaces without leaving lint behind. Here the standard tip is paired with a polypropylene handle in a 6 inch format, and the format is stocked as 50 per pack. Typical work for this foam applicator in a 6 inch format with a polypropylene handle includes cleaning and surface preparation. This foam applicator in a 6 inch format with a polypropylene handle is sold as 50 per pack, with full packaging detail in the specifications below, so stocking and reorder planning stay simple.
Features and Benefits
Tip and Handle Design
- Standard Foam Tip: Reticulated medical grade foam holds and releases fluids evenly, and its open-cell structure wipes surfaces without leaving lint behind. Here the standard tip is paired with a polypropylene handle in a 6 inch format, and the format is stocked as 50 per pack.
- Polypropylene Handle: The polypropylene handle flexes slightly under pressure, which helps when wiping or reaching contoured surfaces. On this format it is paired with a standard foam tip and stocked as 50 per pack.
Sterility and Packaging
- Non-Sterile Format: The non-sterile format of this foam applicator in a 6 inch format with a polypropylene handle is the economical choice for tasks that do not require a sterile field.
- Made in the USA: Puritan manufactures this applicator in Guilford, Maine, under FDA registration and ISO 13485 certification, and packs it as 50 per pack.
Product Specifications
Swab Specifications
- Tip Material: Foam
- Tip Shape: Standard
- Handle Material: Polypropylene
- Overall Length: 6 in (15.2 cm)
- Sterility: Non-sterile
Packaging and Identification
- Packaging: 50 per pack
- Manufacturer SKU: 1806-PF
- Country of Origin: USA
Browse the full Swabs & Media range, or shop everything from Puritan Medical Products.
Made in Maine by a Swab Specialist
There are cheaper generic options in every applicator category, and most of them cost more in repeat collections and inconsistent results. This foam applicator in a 6 inch format with a polypropylene handle is built to a specification, made in Maine, and backed by a manufacturer that makes nothing but swabs and collection products.
- Foam Tip Performance – Reticulated medical grade foam holds and releases fluids evenly, and its open-cell structure wipes surfaces without leaving lint behind. Here the standard tip is paired with a polypropylene handle in a 6 inch format, and the format is stocked as 50 per pack.
- Made in Maine Since 1919 – Puritan has manufactured swabs in Guilford, Maine for more than a century, and this foam applicator in a 6 inch format with a polypropylene handle comes from that same FDA-registered facility.
- Exact Configuration Match – This listing is the foam applicator in a 6 inch format with a polypropylene handle, so the format that arrives is the format the protocol calls for.
Frequently Asked Questions
Is the foam tipped applicator sterile?
No. This foam applicator in a 6 inch format with a polypropylene handle is non-sterile, which suits applications and general tasks that do not require a sterile field. The specifications above state the sterility, tip and packaging for this foam applicator in a 6 inch format with a polypropylene handle.
What is this applicator used for?
This foam applicator is used for specimen collection, medication application, wound care support and cleaning tasks, depending on the clinical setting. The applications Puritan lists for this foam applicator in a 6 inch format with a polypropylene handle are covered in the description above.
Why does the handle material matter?
The polypropylene handle on this format gives the grip and rigidity the task requires, and it keeps the applicator light in the hand. Handle choice also affects flexibility, so buyers match the polypropylene handle and standard foam tip on this format to the collection or application site, and this format is stocked as 50 per pack.
How is this product packaged?
This listing is sold as 50 per pack. The full pack configuration for this foam applicator in a 6 inch format with a polypropylene handle is listed under Packaging and Identification in the specifications above.
Where is this product made?
Puritan Medical Products manufactures this foam applicator in a 6 inch format with a polypropylene handle in Guilford, Maine. The company is FDA-registered, ISO 13485 certified, and has made swabs and applicators in Maine since 1919, including this foam applicator in a 6 inch format with a polypropylene handle.
Is this product single use?
Yes. This foam applicator in a 6 inch format with a polypropylene handle is designed for a single use and should be discarded after the task. Reuse can compromise the sterility and sample integrity this foam applicator in a 6 inch format with a polypropylene handle is designed to protect.