Description
The React Health Luna II (G2) Humidifier Water Chamber is the removable water tub for the Luna II heated humidifier, with a max fill line of 350 mL. Chambers cloud, scale and eventually crack with nightly heating cycles, and a tired chamber is the usual suspect when a humidifier starts leaking or smelling stale.
- 350 mL capacity – the max fill line is marked on the chamber, so filling to the line is foolproof
- Fits every Luna II (G2) – the maker confirms fit across the G2 line, including the QX models
- Distilled water only – the maker specifies distilled water in this chamber, per the device manual
The Chamber That Carries Luna II Humidification
This is the humidifier chamber React Health builds for the Luna II (G2) PAP devices, the tub that slides into the device and holds the water the heater plate warms. The maker rates it to a 350 mL max fill line and is clear that the line should not be passed, since overfilling invites water into the airflow path. It fits all Luna II (G2) devices, QX models included, so there is one chamber for the whole G2 family.
A spare chamber pays for itself the first time the original is in the sink being descaled on a night you need therapy, and it is the clean fix when mineral scale or a cracked base ends the old tub's service. Fill with distilled water only, as the maker directs, and empty and rinse the chamber daily to keep it fresh. The chamber is a wear part by nature, and replacing it restores the humidifier to as-new condition.
Features and Benefits
Capacity and Fit
- 350 mL max fill: the fill line is marked on the chamber wall, and the maker warns not to exceed it
- Whole G2 family fit: one chamber for every Luna II (G2) PAP device, QX models included
In Use
- Distilled water specified: the maker directs distilled water only in this chamber
- Removable tub design: slides out for filling, emptying and cleaning, then seats back into the device
Product Specifications
Product Details
- Device fit: Luna II (G2) PAP devices, including QX models
- Part type: Humidifier water chamber
- Manufacturer: React Health
Capacity and Code
- Maximum fill: 350 mL to the marked line
- Manufacturer code: LG24510
Browse the full Hospital Supplies range, or shop everything from React Health.
Why Chambers Are Replaced, Not Just Cleaned Forever
Heat, water and time work on a chamber from both sides, scaling the base and clouding the walls until cleaning stops restoring it. A new chamber brings back clear visibility of the water level and a base that seals flat on the heater plate. Keeping one spare also means descaling day never competes with therapy night.
- Leak protection – a sound base and rim end the slow seeps that aging chambers develop
- Honest water level – clear walls make the 350 mL line and the remaining water easy to read
- One chamber, whole line – the same tub serves every Luna II (G2) model, QX included
- Genuine maker part – the chamber React Health builds for this humidifier, with the correct fit
Frequently Asked Questions
Does this chamber fit my Luna II QX?
Yes, React Health states this chamber fits all Luna II (G2) PAP devices, including the QX models. It is the one chamber for the G2 family.
How much water does it hold?
The max fill line is 350 mL, and the maker directs that the line not be exceeded. Fill to the line with distilled water only.
Why distilled water?
The maker specifies distilled water for this chamber, as it leaves far less mineral scale on the base and walls. Tap water shortens the chamber's useful life and makes cleaning harder.
Does it fit the Luna G3?
No, the Luna G3 uses its own water chamber, a different part. This chamber is for the Luna II (G2) line only.
How do I know the old chamber is done?
Persistent scale that cleaning cannot remove, clouded walls, a warped or cracked base, and any seeping at the seam are the signs. A chamber is a service part, and replacement is the intended fix.
