Description
The ROHO Standard Cushion Cover is the genuine replacement cover for ROHO neoprene cushions, in two-way stretch fabric that will not fight the air cells underneath. Twenty sizes are stocked across HIGH PROFILE and LOW PROFILE cushions, so the cover matches the cushion's cell grid exactly.
- Two-way stretch top – stretches with the cells so immersion is not hammocked by a tight cover.
- Spacer fabric sides – the manufacturer's standard construction, with the zipper at the back of the cover.
- Non-skid bottom – hook and loop fasteners help secure the cushion in the chair.
- Sized by cell grid – each configuration names the cushion size and profile it fits.
A worn or wrong cover is a quiet performance problem: a cover that does not stretch properly holds the user up out of the cells. This is ROHO's standard replacement, with the two-way stretch top and spacer fabric sides the cushions ship with originally. The zipper sits at the back of the cover, and the bottom is non-skid material with hook and loop fasteners to keep the cushion planted during transfers. Configurations cover HIGH PROFILE and LOW PROFILE cushions from 16 inch seats up to the largest 24 by 20 inch grid, each named by the cushion it fits. Match the configuration to the cushion's size in inches and its profile before ordering, since the cover must match both.
Features and Benefits
Genuine ROHO Construction
- Two-way stretch top panel – moves with the air cells to preserve immersion and envelopment.
- Spacer fabric sides – the standard side material used across the neoprene cushion range.
- Rear zipper – the closure sits at the back, clear of the user's legs and the transfer path.
Fit and Security
- Non-skid bottom – grips the seat surface to limit cushion migration.
- Hook and loop fasteners – help secure the cushion in the chair as the manufacturer intends.
- Exact size matching – configurations state seat size, cell count and profile for a precise match.
Product Specifications
- Construction: Two-way stretch top, spacer fabric sides, rear zipper, non-skid bottom with hook and loop fasteners
- Fits: ROHO neoprene cushions in HIGH PROFILE and LOW PROFILE, per configuration
- Sold As: Single replacement cover (cushion not included)
- Warranty: Cover 6 months (manufacturer limited warranty)
- Configurations: For 16 in x 16 in (9 x 9 Cells) Cushion, High Profile (COV-A99) · For 16 in x 16 in (9 x 9 Cells) Cushion, Low Profile (COV-A99LP) · For 16 in x 18 in (9 x 10 Cells) Cushion, Low Profile (COV-A910LP) · For 16 in x 20 in (9 x 11 Cells) Cushion, Low Profile (COV-A911LP) · For 18 in x 16 in (10 x 9 Cells) Cushion, High Profile (COV-A109) · For 18 in x 16 in (10 x 9 Cells) Cushion, Low Profile (COV-A109LP) · For 18 in x 18 in (10 x 10 Cells) Cushion, High Profile (COV-A1010) · For 18 in x 18 in (10 x 10 Cells) Cushion, Low Profile (COV-A1010LP) · For 18 in x 20 in (10 x 11 Cells) Cushion, High Profile (COV-A1011) · For 18 in x 22 in (10 x 12 Cells) Cushion, High Profile (COV-A1012) · For 20 in x 16 in (11 x 9 Cells) Cushion, High Profile (COV-A119) · For 20 in x 16 in (11 x 9 Cells) Cushion, Low Profile (COV-A119LP) · For 20 in x 18 in (11 x 10 Cells) Cushion, High Profile (COV-A1110) · For 20 in x 18 in (11 x 10 Cells) Cushion, Low Profile (COV-A1110LP) · For 20 in x 20 in (11 x 11 Cells) Cushion, Low Profile (COV-A1111LP) · For 22 in x 18 in (12 x 10 Cells) Cushion, High Profile (COV-A1210) · For 22 in x 18 in (12 x 10 Cells) Cushion, Low Profile (COV-A1210LP) · For 24 in x 18 in (13 x 10 Cells) Cushion, High Profile (COV-A1310) · For 24 in x 18 in (13 x 10 Cells) Cushion, Low Profile (COV-A1310LP) · For 24 in x 20 in (13 x 11 Cells) Cushion, High Profile (COV-A1311)
- Sold as: Each (EA/1)
Browse the full Wheelchair Accessories range, or shop everything from ROHO.
Why Choose the ROHO Standard Cushion Cover?
Covers wear out years before cushions do, and a stretched-out or torn cover quietly degrades the whole seating system. Replacing it with the genuine ROHO standard cover restores the fit the cushion was designed around. With twenty configurations stocked, the exact match for the cushion in the chair is almost certainly here.
- Preserves immersion – the two-way stretch top is specified so the cover never bridges across the cells and lifts the user.
- Exact fit system – sizes follow the same cell grid as the cushions, so there is no guessing between close sizes.
- Stays in place – non-skid bottom and hook and loop fasteners keep the covered cushion positioned through transfers.
- The differentiator – a genuine manufacturer cover, matched by profile and cell count, rather than a universal stretch cover.
Frequently Asked Questions
How do I choose the right configuration?
Match three things from the cushion: its seat size in inches, its cell count and its profile, HIGH PROFILE or LOW PROFILE. Each configuration in this listing is labeled with all three.
Does this cover fit QUADTRO SELECT and other SELECT cushions?
SELECT series cushions use their own cover fitments in the manufacturer's range. This listing covers the standard single and dual compartment neoprene cushions named in each configuration.
Is the cushion included?
No. This is the replacement cover only. The cushion itself is sold in its own listing.
How is the cover fitted?
Unzip the rear zipper, slide the cushion in with the air cells facing the stretch top, and close the zipper. The non-skid bottom faces down, and the hook and loop fasteners help secure it in the chair.
Can the cover be washed?
Yes. The cover can be removed and laundered following the care instructions in the cushion's operation manual, and should be fully dry before refitting.
What does the warranty cover?
The manufacturer's limited warranty covers cushion covers for 6 months from the original purchase date. Damage from misuse is not covered.
