Description
The Safe-t mate Universal Rear Anti-Tippers is a pair of rear safety legs that guard a manual wheelchair against tipping over backward during transfers, slopes and sudden rearward weight shifts. The sliding legs adjust across a wide height range, so one pair fits full-height and lower chairs across a mixed fleet.
- Stops backward tipping during standing and sitting transfers
- Wheel height adjusts from 2 in to 12 in
- Fits 7/8 in and 1 in round frame tubing
- Chrome-plated steel brackets and legs with Grade 5 hardware
- Sold as a pair with mounting hardware and instructions
Backward Tip Protection That Adjusts to the Chair
Rear anti-tippers are the last line of defense when a rider leans or pushes back hard enough to lift the front casters. These legs mount where the horizontal and vertical rear frame members meet and sit ready behind the chair, adjusted so the wheels meet the floor as the chair starts to tip. That contact stops the backward rotation before it becomes a fall, while normal rolling is unaffected because the wheels only touch ground during a tilt. The sliding adjustment gives roughly 10 in of continuous height range, with the wheel settable from 2 in to 12 in below the horizontal frame tube. At the lowest setting the legs reach 15 in behind the mounting point, which gives a long stabilizing footprint on slopes and ramps.
Features and Benefits
- Wide Height Adjustment: wheel height adjusts from 2 in to 12 in below the frame tube, covering full-height through low chairs
- Universal Frame Fit: mounts on round tubing up to 1 in in diameter, including the common 7/8 in and 1 in frame sizes
- Heavy Steel Construction: chrome-plated 11-gauge steel brackets and heavy-duty chrome-plated rectangular steel legs
- Smooth Anti-Tip Wheels: 2 in diameter by 1 in wide plastic wheels roll on contact instead of dragging
- Grade 5 Hardware: mounting hardware is Grade 5 and the kit includes instructions for fitting
Product Specifications
Fitment
- Frame Tubing: round tubing up to 1 in in diameter
- Mounting Location: where the horizontal and vertical rear frame members intersect
- Minimum Frame Ground Clearance: 2 in at the mounting point
Adjustment
- Wheel Height Range: 2 in to 12 in from the bottom of the horizontal frame tube
- Rear Extension: 15 in behind the mounting location at the lowest height
Construction
- Brackets: chrome-plated 11-gauge steel
- Legs: heavy-duty chrome-plated rectangular steel bar stock
- Wheels: 2 in diameter by 1 in wide plastic
- Hardware: Grade 5
General
- Manufacturer: 210 Innovations, LLC
- Model Number: SM-008
- HCPCS Code: E0974
- Warranty: 2-year manufacturer warranty
Browse the full Wheelchair Accessories range for related equipment. The 210 Innovations brand page covers the rest of the Safe-t mate Universal Rear Anti-Tippers line and the wider Safe-t mate range.
Why Choose the Safe-t mate Rear Anti-Tippers
Backward tips are among the most dangerous wheelchair falls because the rider cannot see or catch them. A properly adjusted rear anti-tipper turns that fall into a brief wheel contact and a stable chair.
- One pair adjusts across most chair heights in a fleet
- Steel legs and brackets built for institutional daily use
- Wheels roll on contact rather than scraping the floor
- Pairs with the front anti-tippers for full tip coverage
- Covered by a 2-year manufacturer warranty
Manuals and Troubleshooting Guides
- Safe-t mate Universal Rear Anti-Tippers – Product Use and Specification Sheet
- Safe-t mate Universal Rear Anti-Tippers – Installation Instructions
Frequently Asked Questions
How do rear anti-tippers prevent falls?
The legs are adjusted so their wheels touch the floor when the wheelchair tilts backward. That contact stops the chair rotating further, which prevents a backward tip-over during transfers or on slopes.
What frame sizes do the SM-008 anti-tippers fit?
They mount on round frame tubing up to 1 in in diameter, which covers the common 7/8 in and 1 in wheelchair frames. The mounting point needs at least 2 in of ground clearance at the horizontal frame tube.
How much height adjustment do they offer?
The wheel height adjusts from 2 in to 12 in below the bottom of the horizontal frame tube. The sliding legs give roughly 10 in of continuous adjustment, so the pair suits a wide range of chair heights.
Are they sold as a pair?
Yes, the listing is for one pair of rear anti-tippers with mounting hardware and instructions. One pair equips one wheelchair.
What warranty covers the SM-008?
210 Innovations guarantees Safe-t mate products for 2 years from the date of purchase against manufacturing defects. The manufacturer also advises checking mounting and adjusting hardware for tightness periodically.
Can rear anti-tippers be combined with front anti-tippers?
Yes, the manufacturer suggests using front and rear anti-tip devices together for full tipping protection. The rear pair guards against backward tips while the front pair guards against forward tips and ramp instability.