Description
The Scope-Zyme CST-405C Enzymatic Detergent Concentrate is a multi-enzymatic detergent positioned for endoscope and surgical instrument reprocessing. Its multi-tiered enzyme system works at a half fl oz per gallon, half the dose of a standard enzymatic concentrate.
- Scope focused formula – Positioned for endoscopes alongside surgical instruments in the reprocessing workflow
- Multi-tiered enzyme system – A layered enzyme blend attacks organic soil at a concentrated dose
- Half ounce dosing – Only 1/2 fl oz (15 ml) is required to make a gallon of cleaning solution
- Bacteriostatic concentrate – Inhibits bacterial growth in the ready-to-use concentrate
About This Scope-Zyme Enzymatic Detergent
Scope-Zyme is built on a multi-tiered enzyme system, and its label directs 1/2 fl oz (15 ml) of concentrate per gallon of water for manual, automatic and ultrasonic applications. The optimal temperature range is 120°F to 140°F, and the solution should not exceed 145°F. As a manual pre-soak, instruments soak for a minimum of five minutes, ultrasonic cycles run a minimum of five minutes, and automatic washers deliver 1/2 fl oz per gallon for both pre-wash and regular wash operations. The formula is an extra strength bio-burden penetrant that removes stubborn organic encrustation quickly. It is safe and effective for stainless steel, aluminum, tungsten carbide, copper and brass, and it is free of scale-forming phosphates, chlorides and hydroxides. It is sold as listed, a 1 gallon container in a case of four.
Features and Benefits
Enzyme System
- Multi-tiered action – A layered enzyme system delivers fast, efficient removal of stubborn organic encrustation
- Rapid cleaning start – Enzymatic action begins quickly at working temperature, shortening the soak step
Scope Workflow Fit
- Pre-soak, ultrasonic and washer – The concentrate covers each cleaning method used in scope and instrument reprocessing
- Surface safety – Safe for stainless steel, aluminum, tungsten carbide, copper and brass instruments and endoscopes
Product Specifications
Product Details
- Manufacturer Part Number: CST-405C (sold as CST-405-1)
- Product Type: Multi-enzymatic detergent concentrate, multi-tiered enzyme system
- Form: Liquid concentrate
- pH: Neutral pH
Use and Packaging
- Typical Dose: 1/2 fl oz (15 ml) per gallon of water
- Working Temperature: 120°F to 140°F optimal, do not exceed 145°F
- Contact Time: Minimum 5 minutes for pre-soak, ultrasonic and washer cycles
- Package: 1 Gallon, Case of 4
Browse the full range in Instrument Trays & Sterilization or explore more from Complete Solutions Technologies.
Why Choose This Scope-Zyme Enzymatic Detergent
Scope reprocessing runs on tight turnaround, and the detergent step sets the pace for everything after it. Scope-Zyme concentrates its enzyme system so a half ounce does the work of a full ounce of standard concentrate, which stretches every gallon further. Its neutral, metal-safe chemistry suits the mixed materials found in scope and instrument sets.
- Lower cost per load – Half ounce dosing doubles the working solution each gallon of concentrate produces
- Turnaround friendly – Five minute minimum contact times keep scopes and instruments moving through reprocessing
- Gentle on scope materials – Neutral pH chemistry without phosphates, chlorides or hydroxides protects delicate surfaces
- One detergent for the whole room – Pre-soak sinks, ultrasonic units and washers all run on the same concentrate
Frequently Asked Questions
What is Scope-Zyme CST-405C used for?
Scope-Zyme is a multi-enzymatic detergent concentrate for endoscopes and surgical instruments. It works as a manual pre-soak, in ultrasonic units and in automatic washer equipment.
How much Scope-Zyme goes into a gallon of water?
The dose is 1/2 fl oz (15 ml) of concentrate per gallon of water. Automatic washers are programmed to deliver that same 1/2 fl oz per gallon for pre-wash and regular wash operations.
What temperature and contact time apply?
The optimal working range is 120°F to 140°F and the solution should not exceed 145°F. Pre-soak, ultrasonic and washer contact times run a minimum of five minutes.
Which surfaces can Scope-Zyme clean?
It is safe and effective for stainless steel, aluminum, tungsten carbide, copper and brass instruments and endoscopes. The formula contains no scale-forming phosphates, chlorides or hydroxides.
What package does this listing sell?
This listing sells the 1 gallon container as a case of four. The manufacturer part number is CST-405C and the supplier code for this package is CST-405-1.
