null
Sensoronics

Sensoronics BCI Compatible Disposable SpO2 Sensor – Adhesive Foam Wrap, 9-Pin Connector

(No reviews yet) Write a Review
$35.99 - $376.99
Shipping:
$6.95 flat rate, or free on orders $50+ (contiguous US)
  • Sensoronics BCI Compatible Disposable SpO2 Sensor – Adhesive Foam Wrap, 9-Pin Connector
  • Sensoronics BCI Compatible Disposable SpO2 Sensor – Adhesive Foam Wrap, 9-Pin Connector
  • Sensoronics BCI Compatible Disposable SpO2 Sensor – Adhesive Foam Wrap, 9-Pin Connector
  • Sensoronics BCI Compatible Disposable SpO2 Sensor – Adhesive Foam Wrap, 9-Pin Connector
$35.99 - $376.99
Fast Delivery
Fast Delivery
Most ship in 1–2 days
Shipping
$50+ Ship Free
Flat $6.95
30-Day Returns
30-Day Returns
No questions asked
Secure Payment
Secure Payment
100% safe checkout

Description

The Sensoronics BCI Compatible Disposable SpO2 Sensor is a single-patient adhesive foam sensor built for BCI pulse oximeters, so a fresh sensor goes on each patient and straight into the waste stream after use.

Spot checks and short monitoring runs move faster when the sensor sticks in place, reads through the 9-pin connector, and never waits on a cleaning cycle.

  • Adhesive Foam Wrap – Foam padding cushions the finger or toe while the adhesive holds the optics in line, so readings stay steady through the check.
  • Single-Patient Use – One sensor serves one patient and is then discarded, so cross-contamination worries between patients drop away.
  • 9-Pin Connector – The standard BCI 9-pin plug seats directly into compatible monitors, so setup takes seconds at the bedside.
  • Four Patient Sizes – Adult, pediatric, infant and neonatal sizes cover the unit from nursery to adult wards, so one sensor line stocks every department.

Single-Patient SpO2 Readings Without Cleaning Between Patients

Disposable adhesive sensors solve a daily problem on busy units: reusable clips need cleaning and inspection between patients, and that turnaround costs staff time. This foam wrap sensor skips the turnaround. Staff open a fresh sensor, wrap it on the finger or toe, plug the 9-pin connector into the monitor, and read. When the check ends, the sensor comes off and goes out with the rest of the single-use supplies.

The line covers adult, pediatric, infant and neonatal patients, with size-specific optics placement for each weight range. Cases of 24 stock the supply room for high-turnover areas, and single sensors suit low-volume clinics. The design replaces the Smiths Medical BCI 1300 disposable sensor and cross-references to C&S S503-060, Envitec DA-2221-1 and Pacific Medical NHBC5025-FA, so existing BCI fleets keep working without new monitors.

Features and Benefits

Fit and Placement

  • Adhesive Foam Construction: Soft foam wraps the digit and cushions the skin during spot checks and short monitoring sessions
  • Size-Specific Fit: Adult, pediatric, infant and neonatal sizes place the emitter and detector correctly for each patient weight range
  • Wrap-On Application: The adhesive wrap holds alignment without tape or clips, so placement stays consistent between staff members

Compatibility

  • BCI 1300 Replacement: Built as the compatible replacement for the Smiths Medical BCI 1300 disposable sensor
  • 9-Pin BCI Connector: Plugs into BCI monitors including the 3100, 3300 and 3400 series, Advisor, Capnocheck and Spectro2 lines
  • Cross-Referenced Equivalents: Matches C&S S503-060, Envitec DA-2221-1 and Pacific Medical NHBC5025-FA ordering numbers

Product Specifications

Sensor Details

  • Sensor Type: Disposable adhesive foam SpO2 sensor
  • Connector: 9-pin BCI connector
  • Patient Use: Single patient use
  • Replaces: Smiths Medical BCI 1300

Patient Sizes and Packaging

  • Adult Size: Patients weighing 66 lb or more
  • Pediatric Size: Patients weighing 22 lb or more
  • Infant Size: Patients weighing 2.3 lb up to 44 lb
  • Neonatal Size: Patients weighing less than 6.6 lb, or more than 66 lb on the toe
  • Quantity Per Case: 24 sensors

Browse the full Oximeter Accessories range, or shop everything from Sensoronics.

Why Units Stock the Sensoronics BCI Disposable Line

BCI monitors stay in service across clinics, EMS kits and hospital wards, and each one needs sensors that fit the patient in front of the clinician. This line covers the full size run in one ordering family, with case pricing for busy units and singles for small sites.

  • Full Size Run in One Line – Adult, pediatric, infant and neonatal sizes share one connector and one ordering pattern, so stocking stays simple across departments.
  • No Cleaning Turnaround – A fresh sensor for each patient removes the wipe-down and inspection step, so monitors turn over faster between patients.
  • Case and Single Options – Cases of 24 feed high-volume areas while single sensors keep small clinics stocked, so buyers order in the quantity the site uses.
  • Direct BCI 1300 Replacement – The sensor replaces the BCI 1300 outright, so existing monitors and cables stay in service unchanged.

Frequently Asked Questions

Which monitors does this sensor fit?

It fits BCI pulse oximeters that take the 1300 disposable sensor, including the 3100, 3101, 3180, 3300, 3301, 3302, 3303, 3304, 3400, 3401, 3403, 6100, 9100 and 9200 models, plus Advisor, Autocorr, Capnocheck, Mini Torr, Spectro and SurgiVet units.

How is the sensor applied?

The foam wrap goes around the finger or toe with the optical components aligned on opposite sides, and the adhesive holds it in place during the reading.

Which size should I order?

Adult fits patients weighing 66 lb or more, pediatric fits 22 lb or more, infant fits patients from 2.3 lb up to 44 lb, and neonatal fits patients under 6.6 lb.

Is this sensor reusable?

No. It is a single-patient disposable sensor and is discarded after use.

What does the sensor replace?

It replaces the Smiths Medical BCI 1300 and cross-references to C&S S503-060, Envitec DA-2221-1 and Pacific Medical NHBC5025-FA.

How is it packaged?

Sensors come 24 to a case, and the infant and neonatal sizes are also sold as single sensors for low-volume sites.

View AllClose

Warranty Information

This product may be covered under the manufacturer’s original warranty. Please refer to the manufacturer’s documentation or contact us for assistance.
View AllClose

0 Reviews

View AllClose

Explore our wide range of medical products, enjoy hassle-free shopping, and take advantage of our exclusive offers. Free shipping on orders over $50! Need assistance? Contact our friendly customer support team at (800) 494-5750. Happy shopping!