Description
The Sleepnet Mojo Headgear is the replacement headgear for the Sleepnet Mojo full face mask, built with an upper strap, a lower strap and a headgear frame that the mask magnetic clips snap onto. One size serves every Mojo mask size, from Small to Extra Large, in both the vented and non-vented versions. This listing is the headgear only, sold in a case of 10.
- Magnetic Clip Fit – The headgear works with the mask magnetic clips, so the mask goes on and comes off with a click.
- Upper and Lower Straps – Two strap levels with hook-and-loop tabs let the wearer balance tension above and below the cushion.
- One Size for All Mojo Masks – A single headgear size serves the Small through Extra Large masks, vented and non-vented.
- Blue Side Out – The blue fabric faces outward per the fitting instructions, a quick visual check that the headgear is on right.
The Straps Behind the Mojo Tension Wheel Fit
The Mojo is Sleepnet's adjustable full face mask, with a tension wheel and an AIR°gel forehead cushion that fine-tune the fit at the bridge of the nose. None of that adjustment works when the headgear behind it has stretched, because the wheel can only trim a fit the straps are holding. This replacement restores the upper and lower strap set and the headgear frame the magnetic clips engage. Fitting follows the headgear instructions in the Mojo manual: unhook a clip, settle the mask with the blue fabric facing out, then set the upper and lower straps so the mask rests comfortably and still seals. One headgear size covers the whole Mojo range, which keeps reordering simple for clinics and home users alike.
Features and Benefits
Fit and Adjustment
- Two-Level Straps: Upper and lower straps adjust independently, so tension can be balanced instead of simply tightened.
- Hook-and-Loop Tabs: The strap tabs open and refasten in seconds, making small nightly adjustments easy.
- Magnetic Clip Connection: The headgear works with the mask magnetic clips, so the mask snaps on and releases fast without undoing strap settings.
Use and Care
- Every Mojo Version: The headgear serves vented and non-vented Mojo masks in all four mask sizes.
- Daily Cleaning Routine: The manufacturer recommends daily washing in warm water with a mild detergent, then a full rinse and air dry.
Product Specifications
Product Details
- Product Type: Replacement headgear only, mask not included
- Compatibility: Sleepnet Mojo full face mask, vented and non-vented, sizes Small to Extra Large
- Size: One size
- Package Quantity: Case of 10 headgear
Magnet Safety
- Magnet Field Strength: The magnets in the mask and headgear clips have a field strength of 380 mT
- Implant Contraindication: Do not use this headgear if you, or anyone in close physical contact with you while it is worn, has an active medical or metallic implant that interacts with magnets, including pacemakers, implantable cardioverter defibrillators, neurostimulators, aneurysm clips, metallic stents and cochlear implants
- Distance Warning: Keep the mask and headgear at least 6 inches, about 16 cm, away from any other medical implant or device that magnetic fields can affect
- Safety Notice: This wording follows Sleepnet Field Safety Notice 2024-FSN-1 and the current Mojo instructions for use
Care and Coverage
- Care: Wash in warm water with a mild detergent, rinse well and air dry
- Latex: Does not contain natural rubber latex
- HCPCS Code: A7035
- Warranty: Three-month limited warranty for manufacturer's defects from the date of purchase by the initial consumer
Browse the full Hospital Supplies range, or shop everything from Sleepnet.
Why Mojo Wearers Feel Strap Stretch Before Anything Else
On an adjustable mask, worn straps quietly undo every careful setting at the tension wheel. The Sleepnet Mojo Headgear replacement gives the wheel and the forehead cushion a firm base again, in the one size that serves the whole Mojo range.
- Adjustments Hold Again – Firm straps keep tension wheel settings where they were dialed in – the fit stops drifting overnight.
- Fast On and Off – Magnetic clips spare the strap settings at every removal – the morning refit takes seconds.
- One Size to Stock – A single headgear covers Small to Extra Large masks – clinics keep one spare for every Mojo wearer.
- Genuine Sleepnet Part – The strap set and frame are the manufacturer's own for the Mojo – clip alignment matches the mask exactly.
Manuals and Troubleshooting Guides
- Sleepnet Mojo Headgear – Mojo Vented Full Face Mask Instructions for Use with Mojo Headgear Instructions
- Sleepnet Mojo Headgear – Mojo Non-Vented Full Face Mask Instructions for Use
Frequently Asked Questions
Who should not use this headgear because of the magnets?
Do not use it if you, or anyone in close physical contact with you while it is worn, has an active medical or metallic implant that interacts with magnets, such as a pacemaker, implantable defibrillator, neurostimulator, aneurysm clip, metallic stent or cochlear implant. Keep the mask and headgear at least 6 inches, about 16 cm, from other implants or devices that magnetic fields can affect, and ask the implant manufacturer or a physician when in doubt.
Does one headgear really fit every Mojo size?
Yes, Sleepnet makes a single headgear size for the Mojo line, and it serves the Small, Medium, Large and Extra Large masks. It also serves both the vented and the non-vented versions.
How do I fit the headgear?
Unhook one magnetic clip, place the mask and headgear on with the blue fabric facing outward, and hook the clip back in place. Then set the upper and lower straps so the mask rests comfortably against the face and still seals, without pulling the straps too tight.
How should the headgear be cleaned?
The manufacturer recommends washing the mask and its components daily in warm water with a mild detergent. Rinse thoroughly and air dry, and never clean it in a dishwasher.
What warranty covers this headgear?
The Mojo line carries a non-transferable three-month limited warranty for manufacturer's defects from the date of purchase by the initial consumer. If the headgear fails under normal conditions, Sleepnet will replace the product or its components.