Description
The SMT 2196-1CXA Caster with Brake is the 4 in swivel caster with brake that SMT Health Systems fits to the rear of its Volaro patient lifts. It is the standard rear caster on the PC450, VL210, PA600 and PA800 models, and this replacement restores the braked rear wheel position when a caster wears or is damaged.
- 4 in swivel caster with an integrated brake
- Standard rear caster on four Volaro lift models
- Single mount replacement for one caster position
Where the SMT 2196-1CXA Caster with Brake Fits
Rear casters do the steering and the holding on a patient lift, and the braked rear position is what keeps the lift planted during a transfer. The SMT 2196-1CXA Caster with Brake is the manufacturer part for that position on the Volaro PC450 and VL210 full body lifts and the PA600 and PA800 sit-to-stand lifts. Its 4 in wheel matches the factory wheel base height of those lifts, so ground clearance and leg geometry stay as designed. The swivel action lets the caregiver steer the lift in tight rooms, and the brake locks the wheel when the lift must stay put. Replacing a worn caster with the original part keeps the lift rolling and braking the way SMT built it.
Features and Benefits
- Integrated Brake: Locks the rear wheel so the lift stays planted during transfers
- Swivel Action: Steers the lift through doorways and small bathrooms
- Factory Fit: Matches the 4 in rear caster specification of the Volaro lift range
- Single Mount: Sold as one caster for one wheel position
Product Specifications
Wheel Data
- Wheel Diameter: 4 in
- Caster Type: Swivel caster with brake
- Position: Rear caster position
Compatibility
- Compatible Models: Volaro PC450, VL210, PA600 and PA800 lifts
General
- Manufacturer: SMT Health Systems, Inc.
- Model Number: 2196-1CXA
Browse the full Patient Lifts range for related equipment. The SMT Health Systems brand page covers the rest of the SMT 2196-1CXA Caster with Brake line and the wider SMT Health Systems range.
Why Choose the SMT 2196-1CXA Caster with Brake
Facilities choose the SMT 2196-1CXA Caster with Brake because caster geometry is part of lift safety, not a generic hardware choice. The original part preserves the wheel base height and brake performance the lift was tested with.
- Original SMT part for the braked rear caster position
- Keeps the factory 4 in wheel base height unchanged
- One part covers four Volaro lift models
- Restores steering and holding in a single replacement
Frequently Asked Questions
Which lifts use the SMT 2196-1CXA Caster with Brake?
The SMT 2196-1CXA is used on the Volaro PC450, VL210, PA600 and PA800 lifts. SMT lists it as the 4 in caster with brake for those models.
Where does this caster mount on the lift?
This caster fits the rear wheel position, where the brake holds the lift in place during a transfer. The front positions on these lifts use unbraked swivel casters.
How many casters come in a package?
The 2196-1CXA is sold as a single caster. Order one for each rear position being replaced.
Why replace a caster with the original part?
The original caster keeps the lift at its designed wheel base height and brake strength. A different wheel size would change ground clearance and leg geometry.