Description
The SR Scales SR463iR-3 is an in-floor scale whose platform sits flush with the finished floor, in the configuration without handrail and without printer. Patients roll or walk onto a surface that never rises above floor level, and the corridor keeps a clear, trip-free path.
- 1,000 lb / 454 kg capacity for wheelchairs, stretchers and stand-on weighing
- Flush 32 x 50 in stainless steel platform with no ramps or thresholds
- Touchless auto-weigh activates and locks the reading hands-free
- Rotating wall-mounted display readable from either side
Flush Floor Weighing on the Larger 32 x 50 Platform
The SR463iR-3 installs into the floor itself, so the weighing surface is the floor and nothing about the station sticks up to catch a caster or a toe. That flush profile suits high-traffic patient areas where a ramped platform would slow beds and create a permanent obstacle. At 32 x 50 in, this is the middle platform of the SR463iR series, sized for wheelchairs and stretchers that need more length than the standard pit allows. The stainless steel top tolerates the cleaning chemistry of a clinical corridor and shrugs off the daily caster traffic crossing it. This configuration ships without the optional handrail and without the thermal printer, for sites that document weights through the serial output instead of paper.
Features and Benefits
- Flush In-Floor Design: Platform level with the floor eliminates trip hazards and ramp thresholds
- Touchless Auto-Weigh: Scale wakes and locks a stable weight without a button press
- Rotating Wall Display: Display turns to the caregiver position for each weighing
- Serial Data Output: Weight data flows to EHR and EMR systems for direct charting
- Memory Recall: Last stable weight retrievable after the patient leaves
- BMI Calculation: BMI figure computed when a height is entered
- Antimicrobial Protection: Surface technology that supports routine infection-control cleaning
- Made in the USA: Designed and built by SR Instruments in Tonawanda, New York
Product Specifications
Weighing Data
- Maximum Capacity: 1,000 lb / 454 kg
- Display Type: 16-character dot-matrix LCD, wall mounted
- Display Resolution: 0.1 lb / 0.1 kg
- Accuracy: 0.1% of the calibrated range, plus or minus one digit
- Calibration: Traceable to NIST standards
Platform and Configuration
- Platform Size: 32 in x 50 in (81 cm x 127 cm)
- Platform Material: Stainless steel
- Configuration: Without handrail, without printer
- Power Supply: 120V AC, 50 to 60 Hz
- Auto Power Down: Adjustable between 30 and 300 seconds
- Brand: SR Scales
- Manufacturer: SR Instruments, Inc.
- Model Number: SR463iR-3
- Sold As: Each
More weighing equipment is one stop away in Wheelchair Scales, and every SR Scales product is collected on the SR Scales brand page. One order can cover the scale, its paper and its documentation together.
Why Facilities Build the Scale Into the Floor
An in-floor scale removes weighing from the list of tasks that need equipment fetched, positioned and stored. The station is simply part of the route patients already travel, so weights get captured at admission and rounds without a separate trip. For dialysis and bariatric programs weighing the same patients every visit, that permanence turns a chore into a pass-through.
- No platform storage, setup or ramp alignment before each use
- Flush surface keeps beds, stretchers and carts moving freely
- Touchless capture reduces staff contact during the weigh-in
- Four-year limited warranty backs a permanent installation
Manuals and Troubleshooting Guides
Frequently Asked Questions
What configuration is this SR463iR-3 listing?
This is the base configuration, without the optional steel handrail and without the thermal printer. Sites that chart through the serial EHR output typically choose this build.
How is the SR463iR-3 installed?
The platform frame sets into a floor pit and the wall box display mounts with conduit run between them. SR Instruments publishes installation instructions covering pit dimensions, drainage and the wall box, and the work is a facilities project rather than a bedside setup.
What fits on the 32 x 50 in platform?
The platform takes wheelchairs, walkers, canes and stretchers, plus stand-on patients. The extra length over the 32 x 36 model suits stretcher and bariatric wheelchair traffic.
How does touchless auto-weigh work?
The scale activates when a patient enters the platform and locks the reading once the weight is stable. Staff never need to touch a control mid-weighing, and memory recall can pull the last weight back up afterward.
What warranty covers the SR463iR-3?
SR Instruments backs the SR463iR series with a four-year limited warranty. The operating manual covers the terms plus calibration and troubleshooting procedures.