Description
UltraDose Tartar and Light Stain Remover Powder cleans dentures, partials and bridges with a single dose powder packet and an ultrasonic cycle. One packet goes into 6 oz of water in a beaker, the denture goes in, and the solution is discarded after the cleaning.
- Single dose packets – One 1 oz packet per cleaning, with no measuring or mixing errors
- Denture focused – Made for dentures, partials and bridges in the ultrasonic tank
- No spills or mess – Powder packets replace open bottles of liquid at the bench
- Cost effective format – Pay only for the cleanings you run, one packet at a time
Measured Denture Cleaning Without Bottles, Spills or Guessing
Powder packets take the measuring out of denture cleaning, and that consistency is the point of this format. Staff add one packet to 6 oz of water in a beaker, insert the denture, and run the ultrasonic cycle. The used solution is discarded after each cleaning, so every patient starts with a fresh mix. Packet storage also removes the spills and mess that open liquid bottles leave around a busy lab bench. L&R Manufacturing has built ultrasonic cleaners and processing solutions in New Jersey since 1930.
Features and Benefits
Denture Cleaning
- Tartar and light stain action – Powder formula cleans the buildup dentures collect daily
- Partials and bridges – Made for the full range of removable appliances
- Beaker method – Mixes in a beaker so appliances clean inside the ultrasonic tank
Packet Convenience
- Pre-measured doses – Each 1 oz packet is one cleaning, with no scoops or scales
- Fresh mix every time – Solution is discarded after use, so nothing carries over
- Tidy storage – Packets stack in a drawer without spill risk
Product Specifications
Product Details
- Brand – L&R Manufacturing
- Product Line – UltraDose
- Product Code – 028
- Use – Ultrasonic cleaning of dentures, partials and bridges
- Format – Powder, 1 oz single dose packets
- Mixing – One packet per 6 oz of water in a beaker
Packaging and Case
- Packets per Box – 24
- Boxes per Case – 6
- Sold As – Case of 6 boxes, 144 packets
Browse the full Dental Supplies range, or shop everything from L&R Manufacturing.
Why Labs Switch Denture Cleaning to Packets
Consistent dosing makes denture cleaning repeatable across every technician and every shift. Packets also keep the bench cleaner than open bottles and make inventory a simple packet count. For labs that clean appliances all day, that control adds up.
- Same mix every cleaning – Pre-measured packets remove dosing variation between staff
- Fresh solution per patient – Single use mixing keeps the routine hygienic by design
- Cleaner bench – No open bottles means no drips, spills or crusty caps
- One maker for the whole bench – L&R builds both the ultrasonic cleaners and the solutions used in them
Manuals and Troubleshooting Guides
Frequently Asked Questions
How is the powder used?
Add one packet to 6 oz of water in a beaker and insert the denture, partial or bridge. Run it in the ultrasonic cleaner, then discard the solution after the cleaning.
What does it clean?
It cleans dentures, partials and bridges, targeting tartar and light stains. The powder format is made specifically for removable appliances.
How many cleanings are in a case?
Each box holds 24 packets and each case holds 6 boxes, for 144 single dose cleanings. One packet is used per cleaning.
Why use packets instead of a liquid?
Packets are pre-measured, so every cleaning gets the same mix with no measuring errors. They also eliminate the spills and mess of open liquid bottles.
Is the solution reused?
No, the manufacturer directs users to discard the solution after each cleaning. Every appliance starts in a fresh mix.
Who makes this powder?
L&R Manufacturing Company of Kearny, New Jersey makes it. The company has produced ultrasonic equipment and processing solutions since 1930.
