Description
The Action Products Basic Cover gives the 18 x 18 inch Adaptive Flat Pad a finished, washable surface, with a durable double-knit ponte top and a non-slip bottom that keeps the pad where it was placed. A wide opening with a 1 inch ring-pull zipper makes the pad easy to insert and remove, so the cover can go to the laundry without taking the pad out of service for long.
- Made for the Flat Pad – cut for the Adaptive Flat Pad in 1/2 inch and 5/8 inch thicknesses, and this size fits the 18 x 18 inch pad.
- Non-Slip Bottom – PVC-coated polyester grips the seat or surface so the covered pad stays put.
- Ring-Pull Zipper – the wide opening and 1 inch pull ring make pad changes fast, even with limited hand strength.
- Machine Washable – the cover is machine washable and tumble dry, CAL133 approved, and DEHP and phthalate free.
A Finished, Gripping Surface for the 18 x 18 Flat Pad
The Adaptive Flat Pad is sold bare, which suits trimming and spot protection, but a full-size pad used daily on a seat benefits from a cover. The Basic Cover adds a smooth, durable double-knit surface over the polymer, protects the pad from abrasion and soiling, and gives it a non-slip underside that loose polymer on a smooth seat pan cannot provide.
Fit is specific, and this listing is the 18 x 18 inch size for the Adaptive Flat Pad in the 1/2 inch or 5/8 inch thickness. The same cover family also fits Adaptive Pebble pads, but no cover is made for the 1/4 inch thickness in either line. A 1 inch nylon web handle is built into the bottom for carrying and repositioning.
For buyers covering a different flat-pad size, the matching Basic Cover sizes are separate configurations of the same cover family. Measure the pad's footprint before ordering, because a cover sized for another footprint will not seat the pad correctly.
Features and Benefits
Fit and Function
- Flat Pad Fit: sized for the 18 x 18 inch Adaptive Flat Pad in 1/2 inch and 5/8 inch thicknesses.
- Double-Knit Ponte Top: a durable black ponte surface that protects the pad and presents a finished seat.
- Non-Slip Bottom: DEHP and phthalate free PVC-coated polyester keeps the covered pad in place.
Construction and Care
- Ring-Pull Zipper: a wide opening with a 1 inch ring pull allows easy removal and replacement of the pad.
- Web Handle: a 1 inch durable nylon web handle is built into the bottom.
- Safety and Materials: CAL133 approved.
- Machine Wash and Tumble Dry: launders on ordinary machine cycles.
Product Specifications
Product Specifications
- Brand: Action Products
- Product Line: Basic Cover
- Fits Pad: Adaptive Flat Pad, 18 x 18 inch, 1/2 inch or 5/8 inch thick
- Top Material: Double-knit black ponte fabric
- Bottom Material: PVC-coated polyester, non-slip
- Closure: Zipper with 1 inch ring pull
- Pad Included: No, cover only
- Latex: Not made with natural rubber latex
Compliance and Care
- Country of Origin: Made in USA
- TAA Compliance: TAA compliant
- Care: Machine washable and tumble dry (per the Care and Use guide)
- Warranty: Coverage against defects in materials and workmanship at the time of initial purchase
Browse the full Wheelchair Accessories range, or shop everything from Action Products.
Why Cover a Pad That Works Bare
The flat pad's polymer does its job uncovered, but daily seat use is hard on an unprotected surface. The Basic Cover adds grip, a washable finish, and abrasion protection, which extends the pad's service life in exactly the high-use setting where it works hardest.
- Grip the Polymer Lacks – the non-slip bottom holds the pad on smooth seat pans and surfaces, a differentiator over the bare pad alone.
- Washable Finish – soil goes in the laundry instead of building up on the polymer surface.
- Exact Manufacturer Fit – cut by Action for this pad, so the polymer seats flat with no bunching.
- Made in the USA – manufactured by Action Products in the USA, the home of Akton polymer since 1970.
Frequently Asked Questions
Which pad does this Basic Cover fit?
This size fits the Action Adaptive Flat Pad at 18 x 18 inches, in the 1/2 inch or 5/8 inch thickness. The Basic Cover family also fits Adaptive Pebble pads, but no cover is available for the 1/4 inch thickness.
Is the flat pad included?
No. This listing is the cover only. The wide zippered opening with a 1 inch ring pull lets you insert your existing pad in seconds.
How do I wash the Basic Cover?
It is machine washable and can be tumble dried. The cover is CAL133 approved, and its non-slip bottom material is DEHP and phthalate free.
Why does the bottom matter?
The bottom is a PVC-coated polyester non-slip surface. It keeps the covered pad from sliding on seat pans and other smooth surfaces, and it carries a 1 inch nylon web handle for repositioning.
Is the cover made with natural rubber latex?
No. The Basic Cover is not made with natural rubber latex.
What warranty covers the Basic Cover?
Action Products documents coverage for its wheelchair covers at the time of initial purchase. Warranted to be free of defective materials and workmanship at the time of initial purchase.