Description
The CST-401P Manual and Ultrasonic Detergent Powder is a concentrated powder for manual and ultrasonic cleaning of surgical instruments. A half ounce per gallon of warm water builds a working solution that frees instruments of stubborn organic encrustation.
- Powder concentrate economy – Only a 1/2 ounce is needed to make a gallon of wash solution
- Penetrates bio-burden – Frees instruments of stubborn organic encrustation during the soak
- Counteracts hard water – Chelating additives help protect instruments by preventing scale build up and staining
- Rinses freely – A special surfactant blend accelerates efficient rinsing after cleaning
About This CST-401P Detergent Powder
CST-401P is measured at 1/2 oz per gallon of warm water at 125°F, and the powder should be thoroughly dissolved before instruments go in, with gentle agitation speeding dissolution. Instruments immerse in the cleaning solution for 10 minutes, then are gently agitated, ultrasonicated or scrubbed with a soft brush. A complete rinse with warm running water follows, and the manufacturer recommends a final rinse with de-ionized or distilled water for best results. The powder format stores compactly and measures cleanly, which suits departments that prefer dry concentrate at the sink. It is sold as listed, a 5 lb container in a case of four. Safety goggles and gloves are the labeled precaution when handling the powder.
Features and Benefits
Cleaning Action
- Encrustation release – The solution penetrates bio-burden and frees instruments of stubborn organic encrustation
- Ten minute immersion – A defined 10 minute soak gives staff a consistent, repeatable cleaning step
Instrument Protection
- Scale and stain defense – Chelating additives help protect instruments by preventing scale build up and staining
- Free rinsing finish – The surfactant blend accelerates efficient rinsing so solution does not linger on surfaces
Product Specifications
Product Details
- Manufacturer Part Number: CST-401P
- Product Type: Manual and ultrasonic instrument detergent, powder
- Form: Powder concentrate
- Dose: 1/2 oz per gallon of warm water (125°F)
Use and Packaging
- Immersion Time: 10 minutes, then agitate, ultrasonicate or soft brush
- Rinse: Warm running water, with a de-ionized or distilled final rinse recommended
- Package: 5 lb, Case of 4
- Handling Note: Wear safety goggles and gloves when handling the powder
Browse the full range in Instrument Trays & Sterilization or explore more from Complete Solutions Technologies.
Why Choose This CST-401P Detergent Powder
Some reprocessing areas prefer powder at the sink for its shelf life, compact storage and exact measuring. CST-401P delivers the same bio-burden penetration and hard water defense as the liquid line in a dry concentrate that needs only a half ounce per gallon. The labeled 10 minute immersion also gives trainers a clear, auditable step to teach.
- Consistent results by the scoop – A fixed half ounce dose makes every sink mix the same, regardless of who prepares it
- Bright instruments over time – Chelating additives fight the scale build up and staining that age instrument finishes
- Compact dry storage – Powder containers take less shelf room than ready liquids and will not spill in storage
- Defined process timing – The 10 minute immersion gives supervisors a simple standard for the manual cleaning step
Frequently Asked Questions
How is CST-401P prepared?
Use 1/2 oz of powder per gallon of warm water at 125°F and ensure the powder is thoroughly dissolved. Gentle agitation accelerates dissolution before instruments are immersed.
How long do instruments stay in the solution?
Instruments immerse for 10 minutes in the cleaning solution. They are then gently agitated, ultrasonicated or scrubbed with a soft brush before a complete rinse.
What rinse does the manufacturer recommend?
Rinse completely with warm running water after cleaning. For best results, the label recommends rinsing again with de-ionized or distilled water.
What container size does this listing offer?
This listing sells the 5 lb container as a case of four. The manufacturer part number is CST-401P and the supplier code is CST-401P-5.
What precautions apply when handling CST-401P?
The label directs users to read the safety data sheet before use. As a safety precaution, skin and eyes should be protected with NIOSH approved safety goggles and gloves while handling the powder.
