Description
The Ferno POWER X1 Cot Mattress is the replacement pad sized to the POWER X1 cot surface, at 73 in long, 18 in wide and 5 in thick. It restores the patient surface of a working X1 cot, replacing pads that have compressed, torn or reached the end of their hygienic life.
- Sized for the POWER X1 cot at 73 x 18 in
- 5 in thick pad for patient support
- Weighs 7.2 lb for easy changeover
- Genuine Ferno replacement part
Renew the Surface Your Patients Actually Touch
The mattress is the only part of the cot the patient experiences directly, and it is also the part that wears first. Compression, seam damage and repeated disinfection slowly turn a supportive pad into a hard, cracked surface that is uncomfortable and hard to clean. Replacing the pad returns the cot to its intended patient surface without touching the cot itself.
This pad is the Ferno mattress made for the POWER X1, dimensioned at 73 by 18 in with a 5 in thickness that matches the cot design. At 7.2 lb it is a one person changeover, so the swap fits inside a normal rig check rather than a shop visit. The result is a cot that presents like it should in front of patients and receiving staff.
Fleet managers typically replace cot mattresses on condition and keep a spare on the shelf for the cot that fails inspection. Stocking the genuine Ferno pad guarantees the fit that universal pads approximate.
Features and Benefits
- Exact Cot Fit: dimensioned for the POWER X1 surface at 73 x 18 in
- Full Thickness: 5 in of pad depth restores the designed patient support
- Quick Changeover: the 7.2 lb pad swaps by one person during a rig check
- Genuine Part: the Ferno mattress made for this cot, not a universal substitute
Product Specifications
Dimensions and Weight
- Pad Length: 73 in
- Pad Width: 18 in
- Pad Thickness: 5 in
- Pad Weight: 7.2 lb
Compatibility
- Designed For: Ferno POWER X1 ambulance cot
Shop more hospital supplies and other Ferno equipment at MedicalEx.
Why Replace With the Genuine X1 Pad
Fit is the whole product in a cot mattress. A pad that is an inch off bunches, shifts and wears at the edges, while the genuine Ferno pad drops onto the X1 surface the way the cot was designed.
- Exact dimensions for the POWER X1
- Restores patient comfort and presentation
- One person swap with no shop time
- Keeps the cot hygienic and inspection ready
Frequently Asked Questions
Which cot does this mattress fit?
It is the Ferno mattress for the POWER X1 ambulance cot. Its 73 x 18 in footprint matches the X1 patient surface.
How thick is the pad?
The pad is 5 in thick. That is the full design thickness for the X1 surface.
How long does a changeover take?
The pad weighs 7.2 lb and swaps by one person. Most crews handle it during a normal rig check.
When should a cot mattress be replaced?
Replace the pad when it stays compressed, when seams split or when the surface cracks and can no longer be disinfected reliably. A spare on the shelf avoids downtime when inspection finds a bad pad.
Is this a genuine Ferno part?
Yes, this is the Ferno manufactured mattress for the POWER X1. It is listed under the Ferno part number for this pad.
Additional Information
Warranty: |
This product may be covered under the manufacturer’s original warranty. Please refer to the manufacturer’s documentation or contact us for assistance. |