Nonin UNI-RA Right Angle Sensor Connector Cables, 0.15 m and 3 m, for Nonin Pulse Oximeters

The Nonin UNI-RA Right Angle Connectors route sensor cables at a right angle between the sensor and the monitor. The short UNI-RA-0 relieves strain right at the connection, while the UNI-RA-3 adds a 3 meter right angle run.

• Right angle sensor connection for cleaner cable routing
• UNI-RA-0 at 0.15 m for strain relief at the port
• UNI-RA-3 at 3 m for extended right angle reach
• Shown by Nonin across its monitor accessory range

UNI-RA Right Angle Connectors for Sensor Cable Routing

Straight sensor plugs sticking out of a monitor get levered, bent and broken by passing traffic and bedding. A right angle connector turns the cable run along the device instead of out from it, cutting that strain. The UNI-RA-0 is a short 0.15 meter adapter that solves the geometry right at the port. The UNI-RA-3 carries the right angle format over a 3 meter cable for placements that also need length. Nonin presents the UNI-RA connectors across its monitor and sensor accessory pages as standard system components. Both versions are OEM parts, 3408-000 and 6082-000.

Features and Benefits

Routing

• Right Angle Exit – cables leave the port along the housing instead of straight out.
• Strain Relief – less leverage on the connector during patient movement.
• Two Formats – a short adapter and a full 3 meter cable version.

Details

• System Standard – presented across the Nonin monitor accessory range.
• OEM Parts – manufacturer parts 3408-000 and 6082-000.
• Sensor Path – sits between the PureLight sensor and the monitor.

Product Specifications

Function

• Purpose: Right angle sensor cable connection
• Options: UNI-RA-0, 0.15 m, and UNI-RA-3, 3 m
• Manufacturer Parts: 3408-000 (UNI-RA-0), 6082-000 (UNI-RA-3)
• Position: Between sensor cable and monitor input

Configuration

• Package: Sold individually by version
• Category: Oximeter accessory, connector cable
• Brand: Nonin OEM accessory
• Compatibility: Nonin oximeters with PureLight sensor inputs

See all Oximeter Accessories for the full range, or Shop more Nonin Products for the complete line.

Why Departments Add Right Angle Connectors

Connector damage is a leading cause of sensor circuit failures, and it is mostly geometry. Turning the cable run at the port removes the lever that breaks plugs and sockets.

• Longer Connector Life – right angle routing cuts bending stress at the plug.
• Tider Installations – cables hug the monitor instead of projecting into walkways.
• Two Problem Sizes – a stub adapter for strain relief or a 3 meter version for reach.
• Specified Parts – the connectors are standard Nonin system components.

Frequently Asked Questions (FAQs)

What does a right angle connector do?

It turns the sensor cable connection 90 degrees at the monitor port, so the cable runs along the device. That reduces strain and the chance of the plug being levered or struck.

Which version do I need?

Choose the UNI-RA-0 for a short strain relief adapter at the port. Choose the UNI-RA-3 when you also need 3 meters of cable in the same piece.

Where does it connect?

It sits in the sensor path between the PureLight sensor cable and the monitor input. It changes only the routing geometry, not the sensor electrical path.

Are both lengths in one package?

No. Each version is a separate part number and is sold individually.

Is this a genuine Nonin part?

Yes. Both versions are manufacturer accessories, parts 3408-000 and 6082-000.