Description
The 3-Lead ECG Trunk Cable is a genuine Philips ECG trunk cable made for Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A). Built around 3 leads, 2.7 m (8.9') of cable reach, AAMI/IEC color coding, it keeps setup simple for the care team. Ordering the genuine Philips part avoids the fit and signal problems that generic cables can introduce.
- Number of Leads: 3
- Cable Length: 2.7 m (8.9')
- Color Coding: AAMI/IEC
A 2.7 m Trunk Cable for 3-Lead Monitoring
A trunk cable is the backbone of a reusable ECG monitoring setup, carrying the signal from the lead set to the monitor input. This Philips trunk cable serves 3 lead monitoring with a 2.7 m (8.9') reach, which gives staff room to position the monitor without pulling on the patient connection. Its 12-pin connector plugs into Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A).
The shielded construction limits interference, so the waveform at the monitor stays clean in busy care areas. Philips pairs this trunk with the lead sets listed in the specifications, and the AAMI/IEC color coding keeps the system consistent end to end. It is a multi-patient use accessory that stays with the monitor from patient to patient. Natural rubber latex plays no part in its construction.
Features and Benefits
Design and Performance
- Monitor Connector: 12-pin connector matches the ECG input on the listed Philips monitors
- Cable Reach: 2.7 m (8.9') of trunk length positions the monitor away from the bedside workspace
- Shielding: Shielded construction limits interference for a stable waveform at the monitor
- Color Coding: AAMI/IEC color coding keeps the trunk consistent with AAMI and IEC lead sets
- Lead Capacity: Carries 3 lead monitoring from the lead set to the monitor
- Natural Rubber Latex: Not manufactured with natural rubber latex
Product Specifications
Product Details
- Product Category: ECG
- Product Type: Trunk Cable
- Number of Leads: 3
- Color Coding: AAMI/IEC
- Use Design: Multi-Patient Use
- Sterility: Non-Sterile
- Natural Rubber Latex: Not manufactured with natural rubber latex
- CE Certified: Yes
- Use with Non-Philips Equipment: No, Philips equipment only
Physical Specifications
- Cable Length: 2.7 m (8.9')
- Shielding: Yes
- Number of Pins: 12-Pin
- Package Weight: .200 kg
- Packaging: 1 pack = 1 cable
Compatibility
- Compatible Philips Equipment: M1001A, M1001B, M1002B, M3000A, M3001A, M3002A, M8105A, M8102A, M4735A, M3535A, M3536A, M3536M, 863063, 863064, 863065, 863066, 863068, 863077, M4735A
- Use with Other Philips Supplies: M1671A, M1672A, M1673A, M1674A, M1675A, M1678A, M1622A, M1624A, M1678A, M1626A
You can pair this accessory with the rest of our Hospital Supplies selection for the same care area. More Philips monitoring and cardiograph products live on the Philips Healthcare brand page.
Why Choose This Product
Departments standardize on the genuine Philips accessory because it removes a variable from troubleshooting. When the trace or the printout looks wrong, the accessory itself is not the suspect.
- Genuine Philips OEM: The original Philips accessory, not a substitute or imitation
- Published Compatibility: Philips publishes this part for Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A)
- Exact Fit: Connector and configuration follow the host equipment design exactly
- Latex Consideration: Not manufactured with natural rubber latex for latex sensitive areas
- Cost Over Time: Multi-patient use spreads one purchase across many patients and studies
Manuals and Troubleshooting Guides
Frequently Asked Questions
Which Philips equipment does this accessory work with?
Philips specifies it to Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A). You can confirm your model against the specifications above, since Philips builds this accessory for Philips equipment only.
Which lead sets pair with this trunk cable?
Philips lists the matching lead sets in the specifications above. Using the specified lead sets keeps connectors and color coding consistent end to end.
Can this accessory be reused between patients?
Yes, it is rated for multi-patient use. Clean it between patients following the Philips instructions for use, and it will stay in service across many studies.
Does it contain natural rubber latex?
No, Philips lists it as not manufactured with natural rubber latex. It can be stocked in areas that manage latex sensitivity.
Is this an original Philips accessory?
Yes, you are ordering the original Philips part for the listed equipment. The genuine part matches the connector standard the host device was built around.