Description
The 5+5 ECG Trunk Cable is a genuine Philips ECG trunk cable made for Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A). It brings 10 (5+5) leads, 2.7 m (8.9') of cable reach, AAMI/IEC color coding to every study, which keeps results consistent between patients. The genuine Philips part keeps the ECG chain consistent with the standard the host device was designed around.
- Number of Leads: 10 (5+5)
- Cable Length: 2.7 m (8.9')
- Color Coding: AAMI/IEC
A 10-Lead Trunk Cable in a 5+5 Configuration
A trunk cable is the backbone of a reusable ECG monitoring setup, carrying the signal from the lead set to the monitor input. This Philips trunk cable serves 10 (5+5) lead monitoring with a 2.7 m (8.9') reach, which gives staff room to position the monitor without pulling on the patient connection. Its 12-pin connector plugs into Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A).
The shielded construction limits interference, so the waveform at the monitor stays clean in busy care areas. Philips pairs this trunk with the lead sets listed in the specifications, and the AAMI/IEC color coding keeps the system consistent end to end. It is a multi-patient use accessory that stays with the monitor from patient to patient. It is made without natural rubber latex, which suits latex sensitive areas.
Features and Benefits
Design and Performance
- Monitor Connector: 12-pin connector matches the ECG input on the listed Philips monitors
- Cable Reach: 2.7 m (8.9') of trunk length positions the monitor away from the bedside workspace
- Shielding: Shielded construction limits interference for a stable waveform at the monitor
- Color Coding: AAMI/IEC color coding keeps the trunk consistent with AAMI and IEC lead sets
- Lead Capacity: Carries 10 (5+5) lead monitoring from the lead set to the monitor
- Natural Rubber Latex: Not manufactured with natural rubber latex
Product Specifications
Product Details
- Product Category: ECG
- Product Type: Trunk Cable
- Number of Leads: 10 (5+5)
- Color Coding: AAMI/IEC
- Use Design: Multi-Patient Use
- Sterility: Non-Sterile
- Natural Rubber Latex: Not manufactured with natural rubber latex
- CE Certified: Yes
- Use with Non-Philips Equipment: No, Philips equipment only
Physical Specifications
- Cable Length: 2.7 m (8.9')
- Shielding: Yes
- Number of Pins: 12-Pin
- Package Weight: .202 kg
- Packaging: 1 trunk cable
Compatibility
- Compatible Philips Equipment: M3000A, M3535A, M3536A, M3536M, 862439, M2601B, 860335, 862108, M1001B, M1002B, M3001A/C12, M3001A/C18, M3002A/C12, M8102A/C12, M8105A/C12, M4735A, M4851A, 862231
- Use with Other Philips Supplies: 5-lead lead sets
Companion accessories for this department fill our Hospital Supplies range. Philips products across monitoring, cardiography and recording sit together on the Philips Healthcare brand page.
Why Choose This Product
Clinical engineering teams standardize on the Philips original because its specification is public and testable. The compatibility list in the specifications above is the whole argument.
- Genuine Philips OEM: The original Philips accessory, not a substitute or imitation
- Published Compatibility: Philips publishes this part for Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A)
- Exact Fit: Connector and configuration follow the host equipment design exactly
- Latex Consideration: Not manufactured with natural rubber latex for latex sensitive areas
- Cost Over Time: Multi-patient use spreads one purchase across many patients and studies
Manuals and Troubleshooting Guides
Frequently Asked Questions
Which Philips devices is this accessory compatible with?
Philips specifies it to Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A) and Philips monitor/defibrillators (M3535A and M3536A). The specifications above name every covered model, and Philips builds the part for Philips equipment only.
Which lead sets pair with this trunk cable?
Philips lists the matching lead sets in the specifications above. Using the specified lead sets keeps connectors and color coding consistent end to end.
Is it rated for multi-patient use?
Yes, it is rated for multi-patient use. With cleaning between patients per the Philips instructions for use, it stays in service study after study.
Is natural rubber latex used in its construction?
No, Philips builds it without natural rubber latex. Latex sensitive care areas can use it without a substitution.
Am I ordering the genuine Philips part?
Yes, it is the OEM Philips accessory built for the listed equipment. Original Philips parts follow the same design standard as the host device.