Description
The Plasmapp STERLINK Plus Sterilizer brings low-temperature hydrogen peroxide plasma sterilization directly to the site of care. Its pouch cycle finishes in 14 minutes, and the built-in vacuum pump means the tabletop unit needs no plumbing or ventilation hookups.
- Two Cycle Modes – 36-minute STERLOAD full-chamber cycle and 14-minute STERPACK Plus pouch cycle
- Built-In Pump – no external pump module, plumbing, or ventilation to install
- Low-Temperature Process – sterilizes below 140 °F to protect moisture- and heat-sensitive instruments
- One-Touch Start – a single button starts the cycle, which keeps staff training simple
Main Description
Steam autoclaves cannot handle every instrument in a modern practice, and sending delicate devices out for reprocessing slows the whole schedule. This sterilizer uses hydrogen peroxide plasma at low temperature, so complicated medical devices and moisture-sensitive instruments can be processed in-house. The 14-liter chamber holds a full load for the 36-minute cassette cycle, while the direct-injection pouch mode turns around a single urgent set in 14 minutes. Because the only by-products are steam and oxygen, the unit runs in ordinary treatment rooms without a ventilation build-out. Plasmapp sells the system in more than 50 countries, and the Plus carries FDA 510(k) clearance for the US market.
Features and Benefits
Sterilization Performance
- Direct-Injection Pouch Technology – patented pouch-type injection delivers sterilant inside the pouch for the 14-minute cycle
- Full-Chamber Cassette Cycle – the STERLOAD cycle processes a complete chamber load in 36 minutes
Installation and Operation
- No Utility Hookups – the built-in pump and the lack of plumbing or ventilation requirements keep installation to a countertop and an outlet
- Starter Kit Included – the manufacturer includes a starter kit with the new unit
Product Specifications
Dimensions and Chamber
- Overall Size: 17.1 x 24.2 x 17.2 in
- Chamber Size: 10.4 x 16.1 x 4.9 in
- Chamber Volume: 3.7 gal (14 L)
- Weight: 128 lb
- Pump: Built-in
Cycle and Compliance
- Cycles: STERLOAD 36 minutes and STERPACK Plus 14 minutes
- Process Temperature: Below 140 °F
- Sterilant: Hydrogen peroxide 58 to 59.5% in single-use cassettes and pouches
- FDA Status: 510(k) cleared (K223015 and K212200), 2023
- Warranty: 1 year covering defects in materials and workmanship from the date of delivery
Browse the full Instrument Trays & Sterilization range, or shop everything from Plasmapp.
Why Choose the Plasmapp STERLINK Plus Sterilizer?
Plasmapp was founded at KAIST in South Korea in 2015 and built its STERLINK line around patented direct-injection plasma technology. The company protects that technology with 174 patents and sells in more than 50 countries. Its US arm supports the human-health line from Fort Lauderdale, Florida.
- Fastest Pouch Turnaround – a 14-minute pouch cycle returns an urgent instrument set within the same visit
- Gentler on Instruments – low-temperature processing spares expensive devices the repeated heat stress of steam
- No Build-Out Cost – no plumbing or ventilation work is needed before the first cycle
- Patented Direct Injection – pouch-type direct spray injection is the core technology the whole line was built on
Manuals and Troubleshooting Guides
Frequently Asked Questions
What can this sterilizer process?
It sterilizes metal and non-metal medical instruments, including moisture- and heat-sensitive devices that cannot go through a steam autoclave. Loads run in single-use STERLOAD cassettes or STERPACK Plus pouches.
How long do the cycles take?
The full-chamber STERLOAD cycle takes 36 minutes. The STERPACK Plus pouch cycle takes 14 minutes for a single urgent set.
Does it need plumbing or ventilation?
No, the pump is built in and no ventilation system is required. The only by-products are steam and oxygen.
What consumables does it use?
It runs on single-use STERLOAD cassettes for chamber loads and STERPACK Plus pouches for the pouch cycle. A starter kit is included with the new unit.
Is it FDA cleared?
Yes, the Plus received FDA 510(k) clearance in 2023 under K223015 and K212200. The clearance covers its STERPACK Plus and STERLOAD cycles.
What warranty does it carry?
Plasmapp Co., Ltd. warrants the system against defects in materials and workmanship for one year from the date of delivery. Damage from abnormal use or unauthorized modification is not covered.
