Description
The Safe-t mate Adapter Kits for the SM2-3 is a set of factory fitment kits that extend the Safe-t mate SM2-3 anti-rollback device to wheelchairs whose frames the standard mounting hardware cannot fit. Each kit solves one specific fit problem, from oversized frame tubing to the reclining SX5 rearward axle position.
- Four fitment kits for the SM2-3 and SM2-3W devices
- Oversized U-bolts fit frame tubing from 1 in to 1.160 in
- Below-axle kit works around crowded rear axle bushings
- Tracer IV kit matches the oversized Tracer IV axle bushing
- Lever extension kit fits the reclining Invacare SX5
Fitment Kits That Put the SM2-3 on More Wheelchairs
The standard SM2-3 mounting hardware fits most manual wheelchairs, but a few popular frames depart from standard tubing sizes or axle layouts. These factory adapter kits close those gaps with brackets and hardware shaped for the exact frame in question. The oversized U-bolt kit replaces the standard U-bolts with a set of four sized for tubing from 1 in to 1.160 in in diameter, covering chairs such as the Quickie Breezy Ultra 4 and 510 and the Invacare Insignia. The below-axle kit gives an alternate mounting location for chairs without clearance around the rear axle bushings, and the Tracer IV kit swaps in reduced-clearance stand-offs for that chair oversized axle bushing. The lever extension kit adapts the device to the reclining Invacare SX5, extending the seat lever forward to meet its rearward axle position.
Features and Benefits
- Oversized Tubing U-Bolts: a set of four U-bolts sized for frame tubing from 1 in to 1.160 in in diameter
- Below Axle Kit: mounts below the axle where about 2 in of unobstructed vertical frame is available under the bushing
- Tracer IV Adapter Kit: reduced-clearance stand-offs shaped for the oversized axle bushing of the Invacare Tracer IV
- Lever Extension Kit: adapter plates and spacers that extend the seat lever forward for the reclining Invacare SX5
- Factory-Matched Hardware: each kit is made by the device manufacturer for the SM2-3 and SM2-3W, not a generic substitute
Product Specifications
Compatibility
- For Devices: Safe-t mate SM2-3 and SM2-3W anti-rollback devices
- Oversized U-Bolt Fit: frame tubing from 1 in to 1.160 in in diameter
- Below-Axle Requirement: about 2 in of unobstructed vertical frame below the axle bushing
General
- Manufacturer: 210 Innovations, LLC
- Model Numbers: OSU-BOLTS, SM2-2BAAK, SM2-2TX4AK and SM2-3LEVEXT
- Warranty: 2-year manufacturer warranty
Browse the full Wheelchair Accessories range for related equipment. The 210 Innovations brand page covers the rest of the Safe-t mate Adapter Kits for the SM2-3 line and the wider Safe-t mate range.
Why Choose Genuine Safe-t mate Adapter Kits
An anti-rollback device only protects when it is mounted square and secure. These kits come from the same maker as the device, so the brackets match the frame geometry the device was designed around.
- Exact factory fit instead of improvised hardware
- Opens the SM2-3 to popular chairs it cannot otherwise fit
- One kit per fit problem, so you buy only what your chair needs
- Instruction sheet published for every kit
- Covered by the 2-year manufacturer warranty
Manuals and Troubleshooting Guides
- Safe-t mate Adapter Kits for the SM2-3 – Oversized U-Bolt Kit Instructions
- Safe-t mate Adapter Kits for the SM2-3 – Below Axle Adapter Kit Instructions
- Safe-t mate Adapter Kits for the SM2-3 – Tracer IV Adapter Kit Instructions
- Safe-t mate Adapter Kits for the SM2-3 – Seat Lever Extension Kit Assembly Instructions
Frequently Asked Questions
Which adapter kit does my wheelchair need?
Match the kit to the fit problem, with oversized U-bolts for large frame tubing, the below-axle kit for crowded axle bushings, the Tracer IV kit for that chair, and the lever extension kit for the reclining SX5. The product page for the SM2-3 lists the chair models each kit covers.
Do the kits work with both the SM2-3 and the SM2-3W?
Yes, the manufacturer designs these kits for the SM2-3 and SM2-3W anti-rollback devices. The lever extension kit is the exception in scope, since it adapts the standard SM2-3 to the reclining SX5.
Can two kits be needed on one chair?
Some chairs need a combination, such as the Pride Stylus Plus, which the manufacturer pairs with both the oversized U-bolts and the below-axle kit. Check the kit notes for your chair model before ordering.
Are instructions included for the kits?
Yes, the manufacturer publishes an instruction sheet for each kit, and the sheets are linked in the manuals section of this page. The lever extension kit sheet lists the adapter plates, bolts and spacer it contains.
What warranty covers the adapter kits?
The kits carry the same Safe-t mate coverage, guaranteed for 2 years from the date of purchase against manufacturing defects. Keep the kit with the device it adapts so the pair stays matched.