Description
The Volaro 10006-A7 Charger is the battery charger for the removable power pacs that run the Series 4 and Series 5 Volaro patient lifts from SMT Health Systems. It is the current version of the charger for the 10049 power pac, and it charges fully automatically, shutting off when the pac reaches a full charge.
- Charges the 10049 power pac for Series 4 and 5 lifts
- Fully automatic charge cycle with a charge indicator light
- Bulk charge at 1.5 Amps with an absorption finish
How the Volaro 10006-A7 Charger Keeps Power Pacs Ready
The Volaro lift system is built around a removable power pac, and the Volaro 10006-A7 Charger is the other half of that system. The pac drops into the charging receptacle either way, and the charge light confirms that charging has started. The charger delivers a 1.5 Amp bulk charge until the pac terminal voltage reaches its target, then ramps down through an absorption stage to finish the charge gently. When the pac is full, the light shuts off and charging stops, so a pac can be left on the charger without damage. That automatic behavior is what lets a facility rotate pacs and keep every lift ready for the next transfer.
Features and Benefits
- Fully Automatic: Stops charging when the power pac reaches full charge
- Two-Stage Charging: Bulk charge followed by an absorption ramp for a gentle finish
- Charge Indicator: Light confirms charging and shuts off at full charge
- Either-Way Seating: The power pac fits the receptacle in either orientation
Product Specifications
Charger Data
- Bulk Charge Current: 1.5 Amps
- Bulk Charge Voltage Range: 10 to 14 Volts
- Absorption Mode Current: 1.5 to 0.5 Amps
- Compatible Power Pac: Volaro 10049 power pac
General
- Manufacturer: SMT Health Systems, Inc.
- Model Number: 10006-A7
Browse the full Patient Lifts range for related equipment. The SMT Health Systems brand page covers the rest of the Volaro 10006-A7 Charger line and the wider SMT Health Systems range.
Why Choose the Volaro 10006-A7 Charger
Facilities choose the Volaro 10006-A7 Charger because the rotating power pac system only works when charging is foolproof. The automatic shutoff and indicator light mean any staff member can put a pac on charge correctly.
- Original SMT charger matched to the 10049 power pac
- Automatic shutoff protects pac life over hundreds of cycles
- Indicator light removes guesswork for staff
- Supports the swap-and-go power system of the Volaro lifts
Frequently Asked Questions
Which power pac does the Volaro 10006-A7 Charger charge?
The Volaro 10006-A7 charges the 10049 power pac used by the Series 4 and Series 5 Volaro lifts. SMT describes this charger as the new version for that pac.
Can a power pac be left on the charger?
Yes, the charger is fully automatic and quits charging when the pac reaches a full charge. SMT states the pac and charger will not be damaged by leaving the pac in place.
How does the charger move through its cycle?
The charger supplies a 1.5 Amp bulk charge first, then ramps the current down from 1.5 to about 0.5 Amps in absorption mode. The charge light shuts off when the pac is fully charged.