Description
The Wellell Procare Auto G2 Alternating Pressure Mattress automates firmness for hypersensitive, immobile patients who need pressure relief that never feels harsh. Anyone who has cared for a patient who flinches at every cycle change knows gentleness is a clinical feature, and this system was engineered around it. Twin compressors bring the surface to pressure in about 20 minutes while the sensing pump quietly holds the right support.
- Automatic Firmness Calibration – Pressure sensing technology sets the surface to the patient’s weight without manual intervention, removing setup errors at admission.
- Alternating Low Pressure Mode – A reduced-pressure alternation delivers gentler relief for sensitive patients who cannot tolerate standard cycling.
- Dual Compressor Inflation – Two compressors fill the mattress in about 20 minutes and run below 29 dBA, keeping the room calm.
- Reinforced Cell Sleeves – Sleeves structurally reinforce each air cell, improving pressure distribution, posture stability and safety.
Quiet Inflation and Sensing Built for Sensitive Patients
This hospital and post-acute surface combines an 8 in, 20-cell mattress with a dual compressor pump and automatic pressure sensing. Four modes cover Max Firm for procedures, standard Alternating, Continuous Low Pressure for rest, and Alternating Low Pressure for the most sensitive skin. Additional support cells beneath the controlled cells maintain firmness so the patient never bottoms out, even as settings soften. The quilted cover system completes a surface rated to 550 lb for patients at high to very high risk. It is the Procare line’s answer for wards where patients are both fragile and fully immobile.
Features and Benefits
Pressure Care Performance
- Pressure Sensing Automation: Proprietary sensing automates the pressure setting process and eliminates manual intervention.
- Gentle Low-Pressure Alternation: Reduced pressure levels keep relief consistent and comfortable for sensitive patients.
- Anti-Bottoming Support Cells: Additional air cells under the controlled cells maintain sufficient firmness at all settings.
Pump and Handling
- Dual Compressor System: Twin compressors inflate the mattress in about 20 minutes and operate below 29 dBA.
- Quilted Cover System: This configuration ships as the system with quilted cover, with a nylon/PU top cover layer that includes cotton fabric.
- Cell Sleeve Reinforcement: Structural sleeves optimize pressure distribution and postural stability across the surface.
Product Specifications
Mattress Specifications
- Mattress Type: Replacement, 20 cells
- Mattress Dimensions: 78.7 x 36 x 8 in (200 x 91.4 x 20.3 cm)
- Mattress Weight: 22 lb (10 kg)
- Maximum Patient Weight: 550 lb (250 kg)
- Top Cover Material: Nylon/PU with cotton fabric
- Cell Material: Thermoplastic polyurethane (TPU)
Pump and Therapy Specifications
- Pump Dimensions: 13.4 x 5.3 x 8.1 in (34 x 13.5 x 20.6 cm)
- Pump Weight: 8.4 lb (3.8 kg)
- Therapy Modes: Max Firm, Alternating, Continuous Low Pressure and Alternating Low Pressure
- Noise Level: Below 29 dBA
- Power Supply: 120V, 60 Hz
- HCPCS Code: E0277
Browse the full Air Mattress Systems range, or shop everything from Wellell.
Why Dual Compressors Fill Faster and Run Quieter
A single small compressor works hard, fills slowly and gets loud doing it, which is why so many surfaces disturb the patients they treat. The twin compressor layout shares the work, reaching pressure in about 20 minutes at under 29 dBA. Combined with automatic sensing, the system asks almost nothing of staff after the first plug-in.
- Faster Readiness – Dual compressors cut inflation to about 20 minutes, returning beds to service sooner.
- Library-Quiet Running – Below 29 dBA operation protects sleep for patients and concentration for staff.
- Gentleness as a Feature – Alternating Low Pressure mode serves skin that standard surfaces overwhelm.
- No Dial Charts – Automatic calibration replaces weight tables with sensing, shift after shift.
Manuals and Troubleshooting Guides
Wellell Procare Auto G2 Alternating Pressure Mattress – Product Brochure
Frequently Asked Questions
How long does the mattress take to inflate?
The dual compressor system inflates the mattress in about 20 minutes. Automatic firmness calibration then sets the working pressure for the patient’s weight without further input.
What is Alternating Low Pressure mode for?
It delivers alternating relief at reduced pressure levels for hypersensitive patients. The gentler cycle keeps protection in place for skin that cannot tolerate standard alternation intensity.
How loud is the pump?
The pump operates below 29 dBA, which is quieter than a typical bedside conversation. That low noise suits night use in shared rooms and home settings.
What does the system include?
This configuration is the complete system with the quilted cover, the 20-cell mattress and the dual compressor pump. It is a replacement surface that fits standard 36 in hospital bed frames.
Which patients is it intended for?
It is intended for immobile and hypersensitive patients at high to very high risk of pressure injuries. Hospitals and post-acute facilities use it where gentle, automated pressure care is the priority.