Description
Nonin 8000SL-WO2 PureLight Reusable Large Soft SpO2 Sensor for WristOx2 3150, 16-Pin, 30 cm Cable
The Nonin 8000SL-WO2 Soft Sensor is the Large Soft PureLight sensor made for the WristOx2 3150 wrist-worn oximeter. Its 16-pin connector and short 30 cm cable are proportioned for wrist-worn recording, and the large soft sleeve suits patients whose digits need the biggest of the three soft sizes.
- Made for WristOx2 3150 USB and BLE recorders
- 16-pin WO2 connector with a 30 cm (12 in) cable
- PureLight LED technology for PureSAT processing
- 8000SL-WO2 Large Soft format in the WO2 sensor family
8000SL-WO2 Large Soft Sensor for WristOx2 3150 Recording
Overnight recording punishes rigid sensors, because hours of clip pressure wake patients and end studies. The large soft sleeve distributes that pressure around bigger digits, which is why sleep programs stock it. Its 16-pin WO2 connector and 30 cm cable are built for the WristOx2 recorder rather than adapted from the bedside line. PureLight LEDs inside the sleeve produce the same clean signal the recorder's PureSAT engine expects. For large hands, the right sleeve size is the difference between a completed study and an abandoned one. The reusable sleeve cleans between patients and returns to the shelf for the next study.
Features and Benefits
WristOx2 Fit
- 16-Pin WO2 Connector – the 16-pin standard for the 3150, here on the 8000SL-WO2 large soft.
- 30 cm Cable – short cable geometry matched to wrist to finger routing on the 8000SL-WO2.
- PureLight LEDs – clean spectrum output for the PureSAT engine reading the 8000SL-WO2.
Program Use
- Reusable Across Studies – the 8000SL-WO2 serves patient after patient with standard cleaning.
- Five Style Family – the 8000SL-WO2 shares its connector with the clip, flex and soft sizes.
- Study Ready – the 8000SL-WO2 is built for overnight and ambulatory recording protocols.
Product Specifications
Performance
- Sensor Technology: PureLight LED, reusable
- Style: 8000SL-WO2 Large Soft
- Intended Devices: WristOx2 Model 3150 USB and 3150 BLE
- Connector: 16-pin WO2
Configuration
- Cable Length: 30 cm (12 in)
- Compatibility: WristOx2 3150 per the manufacturer Sensor Compatibility Guide
- Package: Sold individually
- Latex: Not made with natural rubber latex
See all Oximeter Accessories for the full range, or Shop more Nonin Products for the complete line.
Why Programs Stock the 8000SL-WO2 WO2 Sensor
Sizing is the whole game with soft sensors, and large digits are the ones most often forced into the wrong size. A true large sleeve on the shelf keeps those patients in the program.
- Fits the Largest Digits – the large sleeve ends the squeeze of undersized soft sensors.
- Overnight Comfort – distributed pressure avoids the ache that wakes patients mid study.
- Wrist Native Design – the 16-pin connector and short cable are made for the recorder.
- Study After Study Value – the sleeve serves the fleet patient after patient.
Manuals and Troubleshooting Guides
Frequently Asked Questions (FAQs)
Which recorders does this sensor fit?
It is made for the WristOx2 Model 3150 recorders, USB and Bluetooth, through the 16-pin WO2 connector. Standard monitors need the adapter cable listed separately.
How do I choose between the soft sizes?
Match the sleeve to the patient's digit size, with large suiting the biggest fingers. The medium and small WO2 soft sensors carry their own listings.
What cable length does it have?
The cable is 30 cm, about 12 inches. That short run is the correct geometry for a wrist worn recorder.
Is the sensor reusable?
Yes. It is a reusable PureLight soft sensor, cleaned between patients per the manufacturer instructions.
Why record with a soft sensor instead of a clip?
Soft sleeves distribute pressure and tolerate long wear better, which matters most in overnight studies. Many programs offer both and let the patient and protocol decide.
