Description
Nonin 8000SM-WO2 PureLight Reusable Medium Soft SpO2 Sensor for WristOx2 3150, 16-Pin, 30 cm Cable
The Nonin 8000SM-WO2 Soft Sensor is the Medium Soft PureLight sensor made for the WristOx2 3150 wrist-worn oximeter. Its 16-pin connector and short 30 cm cable are proportioned for wrist-worn recording, and the medium soft sleeve is the size bundled with the standard WristOx2 assemblies and starter kits.
- Made for WristOx2 3150 USB and BLE recorders
- 16-pin WO2 connector with a 30 cm (12 in) cable
- PureLight LED technology for PureSAT processing
- 8000SM-WO2 Medium Soft format in the WO2 sensor family
8000SM-WO2 Medium Soft Sensor for WristOx2 3150 Recording
The medium soft sensor is the reference WO2 style, the one Nonin bundles into the standard WristOx2 assemblies and starter kits. That makes this listing the replacement and spare source for the sensor most 3150 fleets already run. The soft sleeve distributes pressure for overnight wear, and the medium size fits the broad middle of the adult hand range. A 16-pin connector and 30 cm cable keep the wrist to finger run short and snag free. PureLight output preserves the recorder's PureSAT accuracy on every study. Programs expanding from starter kits typically add this size first before widening into small and large.
Features and Benefits
WristOx2 Fit
- 16-Pin WO2 Connector – the 16-pin standard for the 3150, here on the 8000SM-WO2 medium soft.
- 30 cm Cable – short cable geometry matched to wrist to finger routing on the 8000SM-WO2.
- PureLight LEDs – clean spectrum output for the PureSAT engine reading the 8000SM-WO2.
Program Use
- Reusable Across Studies – the 8000SM-WO2 serves patient after patient with standard cleaning.
- Five Style Family – the 8000SM-WO2 shares its connector with the clip, flex and soft sizes.
- Study Ready – the 8000SM-WO2 is built for overnight and ambulatory recording protocols.
Product Specifications
Performance
- Sensor Technology: PureLight LED, reusable
- Style: 8000SM-WO2 Medium Soft
- Intended Devices: WristOx2 Model 3150 USB and 3150 BLE
- Connector: 16-pin WO2
Configuration
- Cable Length: 30 cm (12 in)
- Compatibility: WristOx2 3150 per the manufacturer Sensor Compatibility Guide
- Package: Sold individually
- Latex: Not made with natural rubber latex
See all Oximeter Accessories for the full range, or Shop more Nonin Products for the complete line.
Why Programs Stock the 8000SM-WO2 WO2 Sensor
When a fleet standardizes on starter kits, its sensor shelf standardizes on this size by default. Keeping genuine spares of the bundled sensor protects the fleet from downtime when one is lost or damaged.
- The Fleet Standard Size – medium is the size bundled with WristOx2 assemblies and starter kits.
- Overnight Comfort – the soft sleeve distributes pressure through long recordings.
- Exact Replacement – spares match the sensors already in service, keeping studies comparable.
- PureLight Signal – the same LED standard as every WO2 style.
Manuals and Troubleshooting Guides
Frequently Asked Questions (FAQs)
Which recorders does this sensor fit?
It fits the WristOx2 Model 3150, USB and Bluetooth versions, through its 16-pin WO2 connector. It is also the sensor bundled in the 3150 starter kits.
What cable length does it have?
The cable is 30 cm, about 12 inches, the standard WO2 length for wrist to finger routing. It keeps slack off the sensor while the recorder rides on the wrist.
How does medium sizing work?
Medium suits the broad middle range of adult digits, with small and large sizes listed separately for patients outside that range. When a digit falls between sizes, the fit check in the sensor instructions decides.
Can it connect to a standard monitor?
Yes, with the 16-pin to 9-pin sensor adapter cable listed in this catalog. Without the adapter it is a WristOx2 only connection.
Is the sensor reusable?
Yes. The medium soft sensor is reusable and is cleaned between patients following the manufacturer instructions.
