Description
The OR 3-Lead ECG Trunk Cable is a genuine Philips ECG trunk cable made for Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A). It brings 3 leads, 2.7 m (8.9') of cable reach, AAMI/IEC color coding to every study, which keeps results consistent between patients. The genuine Philips part keeps the ECG chain consistent with the standard the host device was designed around.
- Number of Leads: 3
- Cable Length: 2.7 m (8.9')
- Color Coding: AAMI/IEC
An ESU Protected Trunk Cable Built for the Operating Room
A trunk cable is the backbone of a reusable ECG monitoring setup, carrying the signal from the lead set to the monitor input. This Philips trunk cable serves 3 lead monitoring with a 2.7 m (8.9') reach, which gives staff room to position the monitor without pulling on the patient connection. Its 12-pin connector plugs into Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A).
The cable is shielded for operating room use, with ESU protection that guards the signal during electrosurgery. Philips pairs this trunk with the lead sets listed in the specifications, and the AAMI/IEC color coding keeps the system consistent end to end. It is a multi-patient use accessory that stays with the monitor from patient to patient. It is made without natural rubber latex, which suits latex sensitive areas.
Features and Benefits
Design and Performance
- Monitor Connector: 12-pin connector matches the ECG input on the listed Philips monitors
- Cable Reach: 2.7 m (8.9') of trunk length positions the monitor away from the bedside workspace
- ESU Protection: Shielded for operating room use, with protection that guards the signal during electrosurgery
- Color Coding: AAMI/IEC color coding keeps the trunk consistent with AAMI and IEC lead sets
- Lead Capacity: Carries 3 lead monitoring from the lead set to the monitor
- Natural Rubber Latex: Not manufactured with natural rubber latex
Product Specifications
Product Details
- Product Category: ECG
- Product Type: Trunk Cable
- Number of Leads: 3
- Color Coding: AAMI/IEC
- Use Design: Multi-Patient Use
- Sterility: Non-Sterile
- Natural Rubber Latex: Not manufactured with natural rubber latex
- CE Certified: Yes
- Use with Non-Philips Equipment: No, Philips equipment only
Physical Specifications
- Cable Length: 2.7 m (8.9')
- Shielding: Yes for Operating Room (ESU protection)
- Number of Pins: 12-Pin
- Packaging: 1 sales unit = 1 cable
Compatibility
- Compatible Philips Equipment: M1001B, M1002B, M3000A, M3001A, M3002A, M8105A, M8102A, 863063, 863064, 863065, 863066, 863068, 863077, M3536A, M4735A
- Use with Other Philips Supplies: M1622A, M1624A, M1626A, M1671A, M1672A, M1673A, M1674A
Stock the rest of the monitoring area from our Hospital Supplies range. Genuine Philips products across monitoring and cardiography are gathered on the Philips Healthcare brand page.
Why Choose This Product
Choosing the Philips original keeps purchasing simple for clinical engineering. One published compatibility list settles fit for every device in the specifications.
- Genuine Philips OEM: The original Philips accessory, not a substitute or imitation
- Published Compatibility: Philips publishes this part for Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A)
- Exact Fit: Connector and configuration follow the host equipment design exactly
- Latex Consideration: Not manufactured with natural rubber latex for latex sensitive areas
- Cost Over Time: Multi-patient use spreads one purchase across many patients and studies
Frequently Asked Questions
Which Philips devices is this accessory compatible with?
Philips specifies it to Philips patient monitors including IntelliVue models (M3000A, M3001A, M8102A and M8105A). The specifications above name every covered model, and Philips builds the part for Philips equipment only.
Which lead sets pair with this trunk cable?
Philips lists the matching lead sets in the specifications above. Using the specified lead sets keeps connectors and color coding consistent end to end.
Is this a reusable accessory?
Yes, it is rated for multi-patient use. Clean it between patients according to the Philips instructions for use so it stays in service across many studies.
Is it made with natural rubber latex?
No, Philips builds it without natural rubber latex. Latex sensitive care areas can use it without a substitution.
Is this a genuine Philips part?
Yes, it is the OEM Philips accessory built for the listed equipment. Genuine Philips parts match the connector and configuration standards the host device was designed around.